Artiklar

Ingen artikel matchade din sökning
Kategorier

Ingen kategori matchade din sökning
varumärken

Inget varumärken matchade din sökning

Musikinstrument / Gitarr / Gitarrpedaler/Effekter / Effektpedaler / Strömförsörjning

Kompakt Tuner-pedal och 1,6 Ampere strömförsörjning för övriga pedaler. The Black Sheep Power Tuner pedal is a superb piece of kit that ensures you won't go out of tune and also powers up your whole pedal board! Power Tuner is a high precision chromatic tuning pedal which reacts super fast so that whenever you have to retune your strings it will be done accurately and efficiently. It also has two 500mA outlets, six 100mA outlets and cables are included to power up your whole pedal board. The included 12V power adaptor makes sure that neither the Power Tuner or your other pedals run out of juice. The Power Tuner has advanced true bypass circuitry for a smooth signal output with diminished interference. The LED indicator and back screen are bright enough to see in any light conditions.
285391
Multi power supply för effektpedaler med stabiliserade 8x9v och 2x18v kontakter. Totalt 2000mA output i ett robust metallskal. Levereras med nätadapter och alla dc-kablar. Storlek: 104x28x59mm
244629
Y-kabel för DC-plugg. 1 in, 5 ut grenkabel för DC strömförsörjning till effektpedaler.
123199
Med en kapacitet på 1.7 A kan du driva upp till 20 effektpedaler, keyboards och andra 9 V apparater. 
171934
With the PWC6 you can power up to 6 units from one single power outlet. Considering that most common effects have a power consumption of approx. 20mA, a 300mA power supply such as the Palmer PW9V can thus often suffice to power 6 units.
- Type: power distributor (Daisy Chain)
- Inputs: 1
- input connectors: Coaxial power connector 5,5 x 2,1mm
- outputs: 6
- output connectors: Coaxial power connector 5,5 x 2,1mm (9,5mm shaft length)
- max. total length: 2,3 m
- cable length between outputs: 350 mm
282055
DC-kabel med 5 förgreningar.
102289
Massiv strömförsörjningsenhet för pedaler, 2950mA genom 7 isolerade utgångar. Kan ställas på antingen 9V eller 12V DC 450mA. Utgång 6 är 18V DC 250mA och utgång 7 är 12V AC 450mA. Alla utgångar har "minus på pinnen" och volt kan ställas mellan 115 och 230. Levereras komplett med kablar.
246937
För Eden-pedaler och Microtour.
262439
Strömkabel 2,1 mm till 2,1 mm för Hot Stone-serien. Minus i mitten.
269896
Magnestisk isolerad strömförsörjning för gitarrpedalbord med totalt 10 utgångar på 100 till 400 mA.
- 8 st isolerade utgångar. 2,1 mm kontakter med minus i mitten.
- Totalt 10 st. utgångar.
- Transformatorer med magnetisk avskärmning.
- Kortslutnings-skydd på alla utgångar.
- 2 st. Highpower utgångar på 9 eller 12 volt med 400mA.
- 2 st. Midpower utgångar på 9 eller 12 volt med 200mA.
- 2 st. utgångar med ställbar volt för simulering av trötta batterier.
- Kombinerade utgångar för 18 eller 24 volt output.
- Switchbar mellan 120 eller 240 volt.
- Robust konstruktion i 2 mm stål.
- Alla utgångar kan leverera fulla värden simultant utan att få ström-dippar (totalt 1600mA)
- Medföljande kablar: 8 st. 5.5 x 2.1mm, 2 st 5.5 x 2.5mm, 1 st. 3.5mm miniplug
- Mått: (B x D x H): 15,5 x 8,7 x 4,4 cm.
- Vikt: 1,2 kg.
269888
Version 2 av världssuccén Polytune. Polyfon kromatisk / automatisk stämapparat som kan visa alla stränga samtidigt för snabb och intuitiv stämning. Uppgraderad med ljusstark Retina-skärm och en exakthet på +- 0,01 cent samt ultra-snabb Strobe-mode. Dessutom förbättrad analog krets. Fungerar lika bra till bas och gitarr. True bypass och silent tuning.
248887
Kompakt magnestisk isolerad strömförsörjning för gitarrpedalbord med totalt 8 utgångar på 400 mA.
- 6 s.t isolerade utgångar. 2,1 mm kontakter med minus i mitten.
- Transformatorer med magnetisk avskärmning.
- Kortslutnings-skydd på alla utgångar.
- 2 st. Highpower utgångar på 9 eller 12 volt med 400mA.
- Kombinerade utgångar för 18 eller 24 volt output.
- Robust konstruktion i 2 mm stål.
- Alla utgångar kan leverera fulla värden simultant utan att få ström-dippar (totalt 1200mA)
- Medföljande kablar: 6 st. 5.5 x 2.1mm, 1 st 5.5 x 2.5mm, 1 st 3.5mm miniplug.
- Mått: (B x D x H): 14,8 x 8,7 x 4,4 cm.
- Vikt: 1,2 kg.
269889
Strömkabel till Hot Stone-serien med standard 2,1 mm (svart) kontakt till 2,5 mm (blå). Plus i mitten.
269894
Strömkabel 2,1 mm till Hot Stone-serien med för att ansluta 2 st. 9v strömkällor till en i 18 eller 24 v. Minus i mitten.
269897
Iso-Brick är liten och lätt men full av tyst, brusfri DC-ström redo att köra en mängd av pedaler. De tio utgångarna är fullt isolerade vilket eliminerar jordningsstörningar. MXR-teamet har gett pedalens utgångar olika ström- och spänning. 2 st. 9V/100mA, 2 st. 9V/300mA, 2 st. 9V/450mA, 2 st. 18V/250m, 2 st. 6-15V/250mA.
265345
DC-kabel med tre förgreningar.
102288
Strömkabel till Hot Stone-serien med standard 2,1 mm kontakt till mini 3,5 mm. Minus i mitten.
269895
The PWT 08 is a universal pedalboard power supply with huge 2,000 mA output capacity and 8 standard center negative outlets. Two of these are switchable to 9, 12 or 18 volts, and with the included Y cable they can be combined to a single outlet for 21, 24, 30 or 36 volts maximum output. They are isolated from each other and the remaining outlets. Featuring short circuit and overload protection, the PWT 08 is fully regulated to deliver constant voltage. The unit sports a power on LED, bi-color outlet status LEDs and comes with a set of DC cables and dedicated mains adapter. The PWT 08 is the ideal choice if you have just one or two power hungry pedals or 9 volt effects that can be run on higher DC currents for more dynamics and headroom.
- Product type: power supply
- Type: multiple power supply
- Mains connector: wall wart
- Input voltage: 100 V - 250 V
- Outputs: 5
- Output connectors: 2.1 x 5.5 mm
- Output voltage: 9, 12, 18 V
- Max. output current: 2000 mA
- Isolated outputs: yes
- Polarity: center negative
- Cord length: 25 - 50 cm
- Indicators: Power, Fault
- Controls: Output voltage selector
- Width: 140 mm
- Depth: 80 mm
- Height: 32 mm
- Features: 8 x DC cable, 1 x merge cable
282058
Power supply for all Palmer devices with a 9 V input connector and a maximum power consumption of 500 mA.
- Input Voltage: 100 - 240 V AC 50 Hz
- Output Voltage: 9 V DC, 500 mA regulated
- Polarity negative inside
282054
With a stable 250 mA on each of the five center negative barrel style outlets the compact Palmer PWT 05 MK2 is most suited to virtually any pedalboard size. To deliver clean DC power to your pedals and eliminate ground loops between them and the associated hum the outlets are isolated.The PWT 05 MK2 is protected against overload and comes with 25 cm and 50 cm power cable sets plus a merge cable to combine two outlets for a massive 500 mA of 9 V output. Also included is a 1-into-5 daisy chain that lets you power five pedals from one output if their total current draw does not exceed 250 mA. The rugged enclosure of the Palmer PWT 05 MK2 provides mounting and cable relief options while the IEC mains inlet and voltage selector enable worldwide use.
- Product type: power supply
- Type: multiple power supply
- Mains connector: IEC mains cord
- Input voltage: 230 V 50 Hz, 115 V 60 Hz
- Outputs: 5
- Output connectors: 2.1 x 5.5 mm
- Output voltage: 9 V
- Max. output current: each output 250 mA
- Isolated outputs: yes
- Polarity: center negative
- Cord length: 25 - 50 cm
- Display: Power, Overload
- Controls: mains voltage selector, Power
- Dimensions W x D x H: 105 x 140 x 45 mm
282056
Available in two versions, the Palmer Bat Packs are purpose-designed to power multiple stompboxes and pedalboards. They feature high grade, long-life lithium polymer batteries providing 500 mA each from two 9 volt DC center negative barrel outputs that are fully regulated and isolated. Recharging the 4,000 mAh capacity Bat Pack 4000 takes approximately four hours and twice that for the 8,000 mAh Bat Pack 8000. Both come in low-profile all-metal enclosures with 5-segment battery status indicators and convenience type A USB port for charging smartphones or tablets. Run time depends on your pedals current draw.
- Rechargeable 9V DC Power Supply
- Perfect for Palmer Pedalbays
- Low-profile all-metal enclosure with 12 mounting holes
- High grade long-life lithium polymer battery
- 2 isolated and regulated 9V DC outputs
- Type A USB port for charging smartphones or tablets
- Short circuit protection
- 5-segment LED battery status indicator
- Fully functional while recharging
- Product type: power supply
- Type: Battery power supply
- Mains connector: External power supply
- Input voltage: 12 VDC/2A
- Outputs: 3
- Output connectors: 2.1 x 5.5 mm, USB type A
- Output voltage: 9 VDC, 5VDC
- Max. output current: 9V outputs: 500 mA, 5V output: 1A
- Isolated outputs: yes
- Polarity: center negative
- Cord length: n.a.
- Indicators: Battery status
- Controls: Power (on/off)
- Battery capacity: 8000mAh
- Battery type: Lithium Polymer
- Charging time: 8h
- Battery operation time at maximum load: 8h
- Width: 195 mm
- Depth: 83 mm
- Height: 25 mm
286654
Available in two versions, the Palmer Bat Packs are purpose-designed to power multiple stompboxes and pedalboards. They feature high grade, long-life lithium polymer batteries providing 500 mA each from two 9 volt DC center negative barrel outputs that are fully regulated and isolated. Recharging the 4,000 mAh capacity Bat Pack 4000 takes approximately four hours and twice that for the 8,000 mAh Bat Pack 8000. Both come in low-profile all-metal enclosures with 5-segment battery status indicators and convenience type A USB port for charging smartphones or tablets. Run time depends on your pedals current draw.
- Rechargeable 9V DC Power Supply
- Perfect for Palmer Pedalbays
- Low-profile all-metal enclosure with 12 mounting holes
- High grade long-life lithium polymer battery
- 2 isolated and regulated 9V DC outputs
- Type A USB port for charging smartphones or tablets
- Short circuit protection
- 5-segment LED battery status indicator
- Fully functional while recharging
- Product type: power supply
- Type: Battery power supply
- Mains connector: External power supply
- Input voltage: 12 VDC/2A
- Outputs: 3
- Output connectors: 2.1 x 5.5 mm, USB type A
- Output voltage: 9 VDC, 5VDC
- Max. output current: 9V outputs: 500 mA, 5V output: 1A
- Isolated outputs: yes
- Polarity: center negative
- Cord length: n.a.
- Indicators: Battery status
- Controls: Power (on/off)
- Battery capacity: 4000mAh

- Battery type: Lithium Polymer
- Charging time: 4h

- Battery operation time at maximum load: 4h

- Width: 195 mm
- Depth: 83 mm
- Height: 25 mm
286653