Artiklar

Ingen artikel matchade din sökning
Kategorier

Ingen kategori matchade din sökning
Varumärken

Inget varumärken matchade din sökning

Musikinstrument / PA & Ljus / Linebox/DI-box

Justerar belastningen på magnetiska pickuper. Dragster värmer upp och ger ett naturligt ljud. Den hjälper även till att förbättra ljudet i dina trådlösa system. Kompakt och lätt, kan användas överallt!
121930
Bluetooth stereo mottagare för trådlös ljuduppspelning i professionella PA eller studiomiljöer. 2 balanserade analoga XLR utgångar med upp till + 4dB. BT Pro är en Bluetooth direkt box utformad för att spela upp trådlösa signaler från Bluetooth-enheter och omvandla signalen till en balanserad linjesignal för användning i PA eller studiosystemet. BT Pro är utrustad med den senaste Bluetooth A2DP-tekniken, 2,0 EDR (Enhanced Data Rate) hög datahastighet för optimal prestanda. BT Pro konverterar trådlös data till en analog stereosignal som producerar upp till +4 dB output. Signalnivån styrs av en potentiometer på framsidan som delas med inbyggd hörlursförstärkare med 3,5 mm mini TRS utgång.

16-bitars trådlös komprimerat format Upp till 12 meter trådlös kommunikation 2 balanserade XLR utgångar Integrerad hörlursförstärkare för monitorering Isolerade transformatorer eliminerar buller och hum Tar ström från extern 5V försörjning via en mini USB-port och kan även drivas av en bärbar dator eller USB-hubb
279879
IMP 2 Passiv DI-box. Instrument till mixer. Ingång: telehona. Utgångar: telehona till instrumentförstärkare och D3M till mixer. Switch för Ground Lift.
127610
Transformator balanserad stereo-linebox optimerad för anslutning av bärbara ljudkällor
261279
Transformator balanserad stereo-linebox optimerad för anslutning av bärbara ljudkällor.
261278
Active DI box in sturdy metal housing (aluminium/steel) with corner protectors, silver-blue/ metallic, internal 9 V battery (indicator blinks during operation) which is automatically switched off when phantom power is used (LED indicator is on continuously).Extremely low battery usage. Battery: 9 V block (not included).
- Ground lift
- Frequency response 20 Hz - 20 kHz
- THD 1 kHz
- Noise level - 100 dBu
- Input impedance > 1 M Ohm
- Load impedance < 100 Ohm
- Input: 6.3 mm mono jack XLR, link out: 6.3 mm mono jack
- Output: balanced XLR
- Maximum input level: 10/30 dBu
281545
Rackmonterad version av Kickbox 4x4.
219053
Kickbox 4x4 är en 4-kanals aktiv splittbox med 4 mic/line in och 16 ut.
209374
Smart box som omvandlar balanserad linjesignal från t.ex. ett mixerbord och konverteras för anslutning till apparater med lägre ingångsnivå (-10dB). Brum och jordproblem elimineras genom isolatorer.
210255
Standard passive DI box for line and loudspeaker levels. Jack input with parallel THRU output, transformer balanced XLR output. Attenuable input sensivity, can handle both line level and speaker level singals. Features:
- Trafosymetric XLR Output
- Input Sensitivity Adjustable
- Input impedance: 68,000 ohms
- Output impedance: 600 ohms
- Transformer ratio: 10 : 1
- Maximum output: 6 dB
- Ground lift switch
- Metal casing 110 x 73 x 42 mm Specifications
- No. of channels: 1
- Passive/Actibe: Passive
- Transformer balanced: Yes
- Attenuator: -30 dB
- Input/Output Gain: -20 dB
- Ground lift switch: Yes
- Max Input Level: 54 dBu
- Max Output Level: 4 dBu
- Frequency Range 2K Source Imp. -1dB: 20 Hz - 20 kHz
- Input Impedance 60Hz: 60 k
- Nom. Output Impedance: 600
- Housing: Steel
- Dimension: 110 x 73 x 42 mm
281888
The concept behind the cab merger may be very simple, but it fills an important gapHave you ever wanted to connect two guitar cabinets to one amplifier output The PCABM makes it possible.In addition, you can select whether the cabinetsshould be wired in parallel or series with one another. For example, if you interconnect two 8 ohm cabinets The PCABM offers you two resulting impedancesto choose from: 4 ohms (parallel) or 16 ohms (serial). The device is passiveand does not affect the tone in any way.
- Type: passive
- Number of inputs: 2
- Input connections: 6.3mm jack
- Number of outputs: 2
- Output connections: 6.3mm jack
- Cabinet material: die-cast aluminium
- Case surface: powder-coated
- Width: 105 mm
- Depth: 35 mm
- Height: 35 mm
281957
Direktbox med inbyggt 12AX7 rör. A och B ingång för t.ex två olika basar.
261334
JD6 har sex stycken helt oberoende kanaler för hundraprocentig isolation, minimal crosstalk och låga brusvärden.
121953
JDI-boxarna har exceptionell signalhantering, så gott som helt brusfri och utan fasfel eller harmonisk distorsion. En av de mest sålda boxarna worldwide.
121955
Aktiv DI-box speciellt framtagen för ljudkortsmiljöer, HiFi-produkter och renodlade ProAudio-applikationer.
121927
Passive 4-channel DI BOX in a 19 housing. Each channel has a jack input with a parallel output for looping the signal through. An attenuation switch (-30dB) permits connection of a line or speaker signal at the users choice. The specifications are identical with those of the PAN 01. All connections and switches are on the 1 U front panel; the XLR output is additionally present as a parallel socket on the rear panel. 19/1 U housing, 90 mm deep.Features:
- Trafosymetric XLR Output
- Input Sensitivity Adjustable
- Input Impedance: 68,000 ohms
- Output Impedance: 600 ohms
- Transformer Ratio: 10 : 1
- Maximum Output: 6 dB
- Ground lift switch
- 19/1 U Housing, 90 mm deep
281893
Stereointerface som omvandlar obalanserade -10dB signaler (hög impedans) från konsumentprodukter till +4dB balanserat (låg impedans) för anslutning till professionell utrustning. Exempelvis Ipad till aktiva studiomonitorer.
210266
Mycket välljudande aktiv 48V fantommatad DI-box med maximalt headroom. Storsäljaren J48 kan köras riktigt hårt och klarar, tack vare sin unika switchade nätdel, transienter på hela 9V utan att bottna.
121926
Radial JS2 and JS3 är lättanvända problemlösare för alla ljudtekniker. Både JS2 och JS3 har en ingång, en direktutgång och ytterligare två utgångar. PÅ JS2 finns en balanserad utgång med Jensen-transformator och en direktkopplad extra utgång med jordlyft. JS3 har två balanserade utgångar med Jensen-transformatorer.
121929
Stereo DI-box för att koppla ihop t.ex. dator/ljudkort med mixer etc. Konverterar -10 dBu till +4 dBu och tvärtom.
126304
Radial Twin-Iso är en balanserad 2-kanals, isolator för linjenivå som har utvecklats specifikt för professionella turnesystem för att kunna eliminera brum orsakade av jordloopar.
121970
HotShotDM-1 är en innovativ kombinerad mikrofonsplitter och "mute"-switch som gör det möjligt för användaren att med ett tryck på en fotswitch "muta" sin mikrofon och koppla om signalen till monitorsystemet eller intercom för kommunikation på scenen med bandmedlemmar och tekniker.
121966
The PAN08 is a multifunctional device. Each of the four channels can be used independently as an active DI box, line isolation box or booster. The combination socket input accepts unbalanced and balanced signals. The output has dual transformer balanced XLR jacks (front and rear).The signal level can be attenuated by 20 dB for microphone inputs, but can also be boosted in three stages by up to 18 dB for LINE inputs if necessary. With an output level of 12 dBu on a load of 600 with 0.05 % THD / 40 Hz and an output noise level of less than -110 dBu, the unit meets even high professional standards. One special feature that is worthy of mention is battery power. The supply voltage may range from 9 to 18 V. Thus the PAN08 can also be used without mains power outdoors.
281896
The Palmer PEABO is a balanced switcher with one input and two outputs. This makes it the perfect choice for routing a signal to one of two different inputs.
- Onstage, switch your vocal mike between FOH and monitor mixing desk so you can communicate with the monitor mixer or the band in private.
- Two different sound configurations. Suppose you sometimes want a different effect or sound on your microphone, for example, a telephone effect or more Hall. Run both outputs of the PEABO to two channels of the mixing desk - now you can configure these differently and toggle between the two channels onstage whenever you want.
- You can also use the PEABO to address two different rooms or zones selectively.Switching is controlled by a sturdy latching foot switch; the selected output is indicated by a red LED. Slide switches make it possible to select various attenuation levels (6, 15 or 21 dB attenuation) individually for both outputs. A ground lift helps to avoid ground loop hum.Housed in a solid metal case with extended edges for optimum protection of the in- and outputs. Pre-drilled holes permit simple and secure mounting in a rack or on a pedal board.The PEABOs strictly passive circuitry means that it requires no power supply at all. A 9-volt block battery is only required to power the LED.
281973
2-channel passive DI box for line and loudspeaker levels PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This stereo configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with paralell THRU output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.
Specifications
- No. of channels: 2
- Passive/Actibe: Passive
- Transformer balanced: Yes
- Attenuator: -30 dB
- Input/Output Gain: -20 dB
- Ground lift switch: Yes
- Max Input Level: 54 dBu
- Max Output Level: 4 dBu
- Frequency Range 2K Source Imp. -1dB: 10 Hz - 40 kHz
- Input Impedance 60Hz: 60 k
- Nom. Output Impedance: 600
- Housing: Steel
- Dimension: 110 x 110 x 45 mm
281894
The Palmer PAN16 is an 8 channel passive DI box in a 19 1U rack format. Through the special MERGE THRU/IN function, the parallel THRU output can be connected as a second input for looping the signal.The signal is fed with the one from the INPUT jack as a mono sum into the output. Thus, the PAN16 offers a maximum of 16 inputs, two PAD buttons enable an attenuation of 10, 20 or 30 dB. The outputs are on XLR connectors and are electrically isolated and balanced by a transformer. They are available with 8 additional THRU-sockets on the rear panel of the device.
- Type: passive
- Number of Channels: 8
- Number of Inputs: 8/16
- Input Connections: 6.3 mm jack
- Max. Input Level: 54 dBu
- Input impedance: ((at) 60 Hz) 1 M Ohm
- Input Attenuation: 0 / -30 dB
- Number of Outputs: 4 ( 4 Parallel Thru out)
- Number of THRU Outputs per Channel: 2
- Output Connections: 6.3 mm TRS, XLR
- Max Output Level: 54 dB
- Output Impedance: 600 ohms
- Frequency Response: 10 - 40,000 Hz
- Transformer Balanced: yes
- Translation Ratio (Ratio): 10 : 1
- Controls: PAD -10 dB, PAD -20 dB, Ground-Lift, Merge Thru/In
- Housing Material: sheet steel
- Housing Surface: powder coated
- Width: 480 mm / 19
- Depth: 200 mm
- Height: 45 mm/1 U
281897
Active 4-channel DI box. Each channel has a jack input with a parallel output for passing through the signal. An attenuation switch (-30 dB) allows either a line or loudspeaker signal to be connected.Active 4 x DI box, 19 format. Technical specitications identicl to the PAN-02, however, the PAN-03 is built for mains operation. All connections and switches are located on the front panel, an additional parallel XLR output is located in back. 19 inch rack-mount format, 1 rack space, 90 mm front to back. Specifications
- No. of channels: 4
- Passive/Actibe: Active
- Transformer balanced: Yes
- Attenuator: -30 dB
- Power Supply: AC Mains
- Input/Output Gain: -4 dB
- Ground lift switch: Yes
- Max Input Level: 45 dBu
- Max Output Level: 10 dBu
- Frequency Range 2K Source Imp. -1dB: 10 Hz - 20 kHz
- Input Impedance 60Hz: 1 M
- Nom. Output Impedance: 600
- Housing: Steel
- Dimension: 19 x 1 U x 90 mm
281892
Akustisk preamp och DI-box som fungerar på alla typer av pickups.
261339
With the Palmer DMS (Dynamic Mic Switcher) you can switch a dynamic microphone between two inputs. The Palmer DMS Switcher is a passive unit and is exclusively for dynamic microphones. The switch on the DMS is momentary. The range of applications is vast:
- Switch your vocal mic between the FOH mixer and the monitor mixer - this will allow you to talk exclusively to the band or the monitor mixing engineer.
- Sound variation. Send the two outputs of the DMS to two channels of the FOH mixer, adjust the channels differently (for example, adjust the EQ to get a telephone effect). This will allow you to switch between two microphone sounds on stage at your own leisure.
- You can use the DMS to switch the microphone between two different rooms/zones
281984
S Class är en serie 19" rackprodukter avsedda för professionella ändamål. I serien hittas bland annat delningsfilter, equalizers, kompressorer, hörlursförstärkare och installationsmixers. S-PATCH PLUS Patch BayRackmonter patchbay med 48 ¼" teleanslutningar.19", 1 HE. Kan köras i tre olika konfigurationer:
- Normal (för insert-användning)
- Half Normal (möjliggör tappning av en signal tilltvå destinationer)
- Through
- Balanserade anslutningar
126300
Kombinerad phono-förstärkare (RIAA) och DI-box med mikrofonnivåutgångar och utgångar med -10dB konsument linjenivå. Perfekt för att ansluta en vinylspelare till exempelvis ett mixerbord eller en mikrofonförstärkare.
121977
Radial JS2 and JS3 är lättanvända problemlösare för alla ljudtekniker. Både JS2 och JS3 har en ingång, en direktutgång och ytterligare två utgångar. PÅ JS2 finns en balanserad utgång med Jensen-transformator och en direktkopplad extra utgång med jordlyft. JS3 har två balanserade utgångar med Jensen-transformatorer.
121928
Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation 10 dB. Output: transformer balanced. The special floating ground circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm. Specifications
- No. of channels: 1
- Passive/Actibe: Active
- Transformer balanced: Yes
- Attenuator: -30 dB
- Power Supply: 9V / 48V
- Input/Output Gain: -4 dB
- Ground lift switch: Yes
- Max Input Level: 45 dBu
- Max Output Level: 10 dBu
- Frequency Range 2K Source Imp. -1dB: 10 Hz - 20 kHz
- Input Impedance 60Hz: 1 M
- Nom. Output Impedance: 600
- Power consumption: 3.8 mA (9V), 4 mA (48V)
- Housing: Steel
- Dimension: 110 x 73 x 42 mm
281890
A Re-Amplification box is mainly used in studios, with this box you can play back a recorded guitar signal (or any other instrument signal) and send it to an amplifier where it is picked up by microphones and recorded again. This way the recording engineer can experiment with the sound of an instrument. The Daccapo takes care of all impedance matching issues and also eliminates ground loop humming thanks to the use of a Transformer. The signal level to the amplifier can also be adjusted with a level pot.
281958
With its flexible potential applications, the PDI-05 is equally at home in the studio and home recording as well as onstage, e.g., in the racks of Rush or Def Leppard. Originally developed for the preamp/multieffect/power amp combination popular in the late eighties and nineties, this authentic reissue is also suitable for heads and combo amps. Whats more - the precise frequency correction of the stereo speaker simulator turns overdrive and distortion pedals or multieffect units into a genuine preamp with an authentic sound. The PDI 05 lends digital keyboards and drum machines fullness and analogue warmth without complex and time-consuming post-processing at the mixing desk. A built-in headphone amplifier permits environmentally-friendly practicing; its high output power even permits direct connection of ordinary hi-fi speakers.The stereo speaker simulator is active; the power supply is permanently installed. It can also be operated in mono mode and with power amps (in this case, the power amp must always be connected to speakers or a corresponding load, for example the Palmer PDI 06 loadbox).The PDI-05 makes conventional micing unnecessary and provides for a perfectly isolated signal without interference from other instruments and without feedback. With the reissue, pros and aficionados finally once again have a device at their disposal that has proven itself in more than 20 years of use, onstage and in the studio, around the world.
- Typ: activ
- Channels: 2
- input type: unbalanced
- Inputs: 2
- input connectors: 6.3 mm Jack
- output type: balanced / unbalanced
- outputs: 2
- output connectors: 6.3 mm Jack / XLR
- output impedance: 10 kOhm (6.3 mm Jack) / 600 Ohm (XLR)
- controls: Filter Volume, Ground-Lift, mains voltage selector, Phones Level, Power, Voicing
- display: Power
- loadbox: no
- max. load: 200 W
- voicing filter: yes
- power attenuator: no
- transformer isolated outputs: yes
- cabinet material: sheet steel / aluminium
- Cabinet / Housing surface: powder coated / anodized
- width: 480 mm / 19
- depth: 180 mm
- height: 44,5 mm / 1 U
- power supply: 230 / 115 V AC
281964
The Palmer PAN02 PRO is an active DI-box with outstanding additional functions. These include an unbalanced XLR input, in addition to the 3-way attenuator -10, -20, -30 dB and a switchable gain of 12 dB, connected with a maximum output voltage of 20 dBu. The Groundlift switch has a lift position allowing adjustments between a soft and hard grounding . The balanced output is achieved with a high quality transformer in the Mumetall housingthat was specially developed for this purpose. The PAN02 Pro can be powered either with a 9 V battery or 48 V phantom power. A two-colour LED indicates which source supplies the power.
- Type: active
- Number of Channels: 1
- Number of Inputs: 2
- Input Connections: 6.3 mm jack, XLR/f unbalanced
- Max. Input Level: 45 dBu
- Input Impedance: 0 dB & 12 dB: 1 MOhm; -10 & -20 dB: 70 kOhm; -30 dB: 40 kOhm
- Input Attenuation: 0 dB, -10 dB, -20 dB, -30 dB
- Signal Gain: 12 dB
- Number of Outputs: 1
- Number of THRU Outputs per Channel: 1
- Output Connections: XLR, 6.3 mm jack
- Max Output Level: 20 dBu
- Output Impedance: 600 ohms
- Frequency Response: 20Hz - 20,000 Hz
- Transformer-balanced: yes
- Translation Ratio (Ratio): 3.16:1, 10:1, 31.6:1, 1:4
- Controls: Ground-Lift, Attenuator, Boost, Battery/ 48 V Power
- Power Supply: 9 V block battery, 48 V phantom power
- Housing Material: sheet steel
- Housing Surface: powder coated
- Width: 116 mm
- Depth: 140 mm
- Height: 43.5 mm
281891
Users frequently attempt to connect a DI box in reverse in order to feed a balanced signal into an unbalanced input. Because of mismatching, however, this leads to unsatisfactory results. With the PDIR01 (DI-REVERSE), we offer a box that provides a perfect technical solution to the problem without using adapters.
- Type: passive
- Number of channels: 1
- Number of inputs: 1
- Input connections: XLR/f
- Max. input level: 6dBu
- Input impedance: 2 kohms
- Number of outputs: 1
- Output connections: 6.3 mm jack
- Max. output level: 6dB
- Output impedance: 2 kohms
- Frequency range: 20Hz - 20kHz
- Transformer balanced: yes
- Transformation ratio: 1:1
- Controls: Ground lift
- Housing material: Sheet steel
- Housing surface: powder-coated
- Width: 110 mm
- Depth: 35 mm
- Height: 39 mm
281969
The PMBL-ACTIVE is a 2-channel stereo line level merge box that can be used to merge two stereo line signals into one stereo output. One classic application: routing two mixing desks to one PA system. The unit has enough amplification to boost even semi-professional levels accordingly. The input channels are galvanically isolated from one another. Each channel offers a mute switch and the ability to mix the stereo signal down to mono. The unit is housed in a 1 U/9.5 case and has a built-in power supply.
282027
Smart box som omvandlar + 4dB linjesignal från t.ex. ett mixerbord och konverteras för anslutning till apparater med lägre ingångsnivå (-10dB). Brum och jordproblem elimineras genom isolatorer.
210256
1  2  Nästa »  |  Visa alla