Artiklar

Ingen artikel matchade din sökning
Kategorier

Ingen kategori matchade din sökning
varumärken

Inget varumärken matchade din sökning

Musikinstrument / PA & Ljus / Ljus

The CLP 56 RGB 05 PS is a traditional PAR 56 can that&39;s high-tech on the inside. 151 ultra-bright LEDs 51 x red, 49 x green, 51 x blue create an optimal colour mix and awe-inspiring lighting. The CLP 56 RGB 05 PS has a beam angle of 25 degrees and at just 30 Watt, its power consumption is at least ten times lower than that of conventional PAR cans.The CLP 56 RGB 05 PS has three operating modes - DMX with four or six control channels, standalone steady light, colour gradient or music-controlled via an integrated microphone. All settings can be configured quickly and easily using the three buttons and the LED on the back.151 LEDs 51 x red, 49 x green, 51 x blue
Beam angle of 25 degrees
Cooling method: Heat sink
Sturdy aluminium housing
Three operating modes DMX, standalone, sound control
Extremely low power consumption max. power consumption of 30 Watt
Specifications
Product: LED Par Can
Type: PAR56
Colour Range: RGB
Number of LEDs: 151 51 x red, 49 x green, 51 x blue
LED Type: 5 mm
Beam Angle: 25°
DMX Input: XLR 3-pole
DMX Output: XLR 3-pole
DMX Mode: 4/6-channel selectable
DMX Functions: RGB, Master Dimmer, Strobe, Sound Control, Colour Jump, Colour Fade
Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
Controls: Mode, Value Up, Value Down
Indicators: LED Display
Power Supply: 230 V
Power Consumption: 30 W
Power Connector: Schuko
Housing Material: Aluminium
Housing Colour: Black
Dimensions without mounting bracket: 170 x 170 x 169 mm
253009
6-kanalers DMX - och analog styrbart dimmer pack

EUROLIGHT LD6230 är en high-end 6-kanals DMX / analogt kontrollerat dimmer pack vars bredd av funktioner gör den idealisk för användning i tv-studios, teatrar och liveuppträdanden. Du kan styra den antingen digitalt med dess DMX512 gränssnitt eller analogt med hjälp av ytterligare en 8-polig DIN-kontakt. LD6230 har en justerbar förvärmning och limiter-funktion för att förlänga lampans livslängd.

6-kanals, DMX / analog-kontrollerad dimmer pack med upp till 10 A belastning per kanal
3-fas nätspänning (en fas vid lägre uteffekt)
Standard DMX512 gränssnitt
Ytterligare 8-polig DIN-kontakt för analog styrning (0 - 10 V)
Justerbar Värm och Limiter för att förlänga lampans livslängd
Exakt "curve"-funktionen möjliggör val av olika fade lägen
Switch alternativ för enkel on / off styrning av varje kanal
Manuellt läge för ljusreglering utan extern belysning
Automatisk "save" funktion sparar alla inställningar efter att man lämnat "Configuration mode"
3-siffrig display och dedikerade LED:s för bättre kontroll i mörk miljö
Harting ® och CEE anslutningsalternativ (kontakter medföljer ej)
Högkvalitativa komponenter och exceptionellt tålig konstruktion ger lång livslängd
171810
The Cameo Instant Series Air 1000 Pro is ahigh-performance wind machine for applications in theaters, fashion shows, motion pictures, clubs, discotheques, theme parks and live music. With a maximum air flow of 56 m per minute and continuously adjustable fan speed it creates a wide range of wind effects from the slightest breeze to strong, heavy gusts. The air stream exhaust port is continuously variable to allow for precise directional throw or widespread diffusion up to 21 m and 180. The Air 1000 Pro isDMX-controllable, provides standalone functionality and includes a convenient handheld infrared remote. It features3-pin and 5-pin DMX inputs and outputs, a 3-segment LED display and low-noise fan motor for whisper-quiet operation.Designed for floor and truss mounting the Cameo Air 1000 Pro can be used on its own or as an ideal addition to a fog, smoke or haze system.
- Item N; CLIA1000PRO
- Product Type: wind machine
- Max. Air Flow: 56 m/min
- Max. Distance: 21 m
- Noise: 45 db - 51 db
- Fan Diameter: 310 mm
- DMX Input: XLR 3-pin male XLR 5-pin male
- DMX Output: XLR 3-pin female XLR 5-pin female
- DMX Mode: 1-channel
- DMX Modes: fan
- Standalone Modes: fan
- Controls: Start/Stop/Mode, potentiometer for fan power, Value Up, Value Down
- Display Elements: 3-segment LED display
- Power Supply: 240 V AC, 50 Hz
- Power Consumption: 75 W
- Power Connector: power cord with safety plug (Type E / CEE 7/7)
- Housing Colour: black
- Dimensions:
- Width: 385 mm
- Height: 385 mm
- Depth: 515 mm
- Weight: 8.5 kg
280977
Professionell Die-Cast PAR Spotlight. UP1200 inkluderar fyra inställningar, smal spot, spot och 2 st medium spridning av ljuset. I spotlightens ram passar vanliga färg folier, vilket gör det enkelt att passa in i din befintliga scenbelysnings arsenal. Den mycket reflekterande och polerade reflektorinsatsen ger extremt högt ljusidensitet.

Denna otroliga Spotlight är innesluten i ett ultra-robust gjutet aluminium hölje som kommer att hålla show efter show. Dess totala mått gör den lätt att transportera och hantera. Den levereras utrustad med ett flexibelt monteringsfäste för exakt positionering.
Lampa är ej inkluderad (Behringer 575H).
172020
The Cameo Auro® Beam 150 is an ultra-fast moving head with unlimited Pan and Tilt movement, 16-bit resolution and a 3,600 Hz refresh rate. Seven 15 Watt Quad RGBW LEDs produce rich colours, fresh pastel colours and vibrant shades of white with a 12° beam angle and a light intensity of 50,000 lux; the Single Pixel Control ensures impressive Pixel Mapping effects.

The professional features of the Auro® Beam 150 include a low noise temperature controlled fan, powerCON mains connectors from Neutrik and 3- and 5-pin inputs and outputs for the DMX signal. It can be operated fully automatically with programmable scenes or music, or used in standalone, master or slave mode; when using DMX, 5-channel, 11-channel, 19-channel and 41-channel control modes are available, featuring among others dimmer and strobe functions.

The rugged black metal and ABS housing of the Cameo Auro® Beam 150 has 6 buttons and a backlit display for easy operation. The Moving Head can be used with all mains voltages from 100 to 240 volts and is sold with a power cable and an Omega mounting bracket.
- Item Number: CLABEAM150

- Product Type: LED moving light
- Type: moving head
- Colour Spectrum: RGBW
- Number of LEDs: 7
- LED Type: 15 W
- Refresh Rate: 3,600 Hz
- Beam Angle: 12°
- DMX Input: XLR 3-pin male, XLR 5-pin male
- DMX Output: XLR 3-pin female, XLR 5-pin female
- DMX Mode: 5-channel, 11-channel, 19-channel, 41-channel
- DMX Functions: Pan/Tilt, Pan/Tilt fine, Dimmer, Strobe, Pixel-Control
- PAN Movement: infinite
- TILT Movement: infinite
- High-speed Stroboscope: > 30Hz
- Standalone Modes: Show, Sound Control, Auto Run
- Controls: Value Down, Mode, Enter, Value Up, +, -
- Display Elements: colour LC display
- Power Supply: 100 - 240 V AC / 50 - 60 Hz
- Power Consumption: 130 W
- Power Connector: Neutrik PowerCon IN/OUT
- Housing Material: metal, ABS plastic
- Housing Colour: black
- Cooling System: large, temperature controlled fan
- Luminous Intensity: 50,000 lx 1m
- Width: 375 mm
- Height: 260 mm
- Depth: 180 mm
280934
The Cameo FLAT PRO series FLOOD IP65 TRI is acompact outdoor LED flood light with IP65 rating, 120 beam angle and convection cooling. A60 watt tri-color COB LED generates rich, saturated RGB colors with a3,000 Hz refresh rate providing flicker free performance. The black heavy-duty metal enclosure featuresscrew connectors for DMX and mains input and output plus a backlit display with mode, enter, up and down keys for easy operation. The Cameo FLOOD IP65 TRI allows for2-channel, 3-channel 1, 3-channel 2 and 6-channel DMX control as well as master, slave and standalone modes while a setting lock prevents unauthorized menu access. The universal bracket adds a wide variety of mounting options. Barn doors are available as accessory.
- Product number: CLFLOODIP65TRI
- Product type: LED FLOOD LIGHT
- Type: FLAT PRO
- Colour spectrum: RGB
- Number of LEDs: 1
- LED type: 60 W COB TRI LED
- refresh rate: 3000 Hz
- Dispersion: 120
- DMX intput: 3-pin special connector, screwable
- DMX output: 3-pin special connector, screwable
- DMX mode: 2-channel, 3-channel 1, 3-channel 2, 6-channel
- DMX Functions: Colour Macro, RGB, Master Dimmer, Strobe, Colour Jumping, Colour Fading
- Standalone modes: Master/Slave, Auto, Static, Macro, Jumping, Fading
- Controls: Value Down, Value Up, mode, Enter
- Display: backlit LCD
- Operating voltage: 110 V AC - 240 V AC / 50 - 60 Hz
- Power consumption: 75 W
- Power connector: 3-pin special connector, screwable
- Housing material: metal
- Cabinet colour: black
- Protection class IP: 65
- Cooling: Convection
- Illuminance: 830 lx 1m
- Dimensions without mounting bracket
- Width: 180 mm
- Height: 180 mm
- Length: 120 mm
280967
Professional Studio PAR with 18 ultra-bright 3-Watt TRI LEDs in a sturdy, black aluminium housing with a beam angle of 25 degrees. It is actuated either via the DMX protocol (3-pole XLR) with six control channels, in master/slave modeor standalone mode (sound control, colour change, solid colours). The CLPST 64 TRI 3 W is operated via four push buttons and an LED display. Its power consumption is a mere 80 Watts.
- 18 ultra-bright 3-Watt TRI colour LEDs
- Beam angle of 25 degrees
- 80-Watt power consumption
- Operated via DMX, in master/slave mode or standalone mode
- Cooling method: Fan
- Compact, sturdy housing
- Product: LED Par Can
- Type: Studio PAR64
- Colour Range: RGB
- Number of LEDs: 18
- LED Type: 3 W TRI Colour
- Beam Angle: 25
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 6-channel
- DMX Functions: RGB, Master Dimmer, Strobe, Sound Control, Colour Jump, Colour Fade
- Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
- Controls: Mode, Enter, Value Up, Value Down
- Indicators: LED Display
- Power Supply: 110 V AC - 250 V AC
- Power Consumption: 80 W
- Power Connector: Earthing contact
- Housing Material: Metal
- Housing Colour: Black
- Dimensions (without mounting bracket): 230 x 220 x 260 mm
281068
The Cameo CLCONTROL6 is an especially compact DMX controller with 6 channels that is perfect for controlling small lighting systems. It can be mounted in many ways and of course can also be used as a freestanding unit; it is extremely easy to operate.The CLCONTROL6 has 6 smoothly shifting faders for the individual DMX channels and a master fader. It can be powered using the included external power adapter or batteries and thus is universally useable for manual control of LED systems. A 3-pole XLR socket is used as the DMX output; a red LED serves as a power indicator. This straightforward lightweight impresses with clear functionality and high user friendliness.Product type: DMX mixer
Type: DMX 512 protocol
Number of DMX channels: 6
DMX output: 3-pole XLR, female
Controls: 6x channel faders, master dimmer
Indicators: Power LED
Power supply: External power adapter, 9V block battery
Operating voltage: 9 - 12 V DC
Width: 165 mm
Height: 56 mm
Depth: 131 mm
Accessories included: Power pack, AC adapter, 9V block battery
253008
Komplett LED-paket med 8st svarta LED Par56-kannor, två stativ med bom, ljusmixer med 6 kanaler och kablar.
SET100049
Product: Compact LED Lighting Set
Type: 4 Flat Can Bar
Colour Range: RGB
Number of LEDs: 4 x 108
LED Type: 10 mm
Beam Angle: 25
DMX Input: XLR 3-pole
DMX Output: XLR 3-pole
DMX Mode: 6/9/15-channel selectable
DMX Functions: RGB, Master Dimmer, Strobe, Sound-Control, Colour Jump, Colour Fade
Remote Connector: XLR-5 pole
Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound-Control, Slave
Controls: Mode, Enter, Value Up, Value Down
Indicators: LCD Display
Power Supply: 230 W
Power Consumption: 50 W
Power Connector: IECC Euro Power Socket male
Housing Material: Metal
Housing Colour: Black
Dimensions:1000 x 220 x 55 mm
Specifications CLMPARFOOTProduct: Foot Switch
Controls: Mode, Up, Down, Blackout, Microphone Sensitivity
Indicators: Red, Green, Yellow LED
Connector: 5-pole XLR male
Functions: Static Colour, Sound Active, Program Selection, Full On, Blackout
Dimensions: 450 x 150 x 60 mm
Features: 10 m 5-pole XLR cable
Specifications SLTS017EStand material: steel
Crossbar material: steel
Stand surface: powder-coated
Crossbar surface: powder-coated
Stand colour: black
Crossbar colour: black
Number of extensions: 2
Min height: 1700
Max height: 3500
Transport length: 1410
Holding fixture for TV spigot: yes
252035
The Cameo HydraBeam 300 RGBW combines 3 ultra fast, individually controllable moving heads with 540° pan and 270° tilt in a single triangular fixture. They are equipped with high power 10W quad LEDs by Cree providing a beam width of 4.5° each. A low-noise fan keeps the fixture cool.

The HydraBeam 300 RGBW features 5 modes of DMX control plus sound activation. It can be used as standalone, master or slave and includes 16 automated operating modes, the strobe function fires up to 30 flashes per second.

The rugged black construction of steel and ABS sports a backlit display with four buttons for easy manual control. The Cameo HydraBeam 300 RGBW operates on 100 " 240 volts AC and comes with an omega bracket and detachable pole mount for universal mounting options.

- Product type: LED Moving Light
- Type: Moving Head
- Colour spectrum: RGBW
- Number of LEDs: 3
- LED type: 10 W
- Dispersion: 4.5°
- DMX input: XLR 3-pin male
- DMX output: XLR 3-pin female
- DMX mode: 36-channel, 26-channel, 16-channel, 10-channel, 6-channel
- DMX Functions: TILT, strobe, colour change, Dimmer, PAN
- PAN movement: 540°
- TILT movement: 270°
- High Speed Strobe: 20Hz
- Standalone modes: Sound control, Auto run
- Controls: Mode, Value Up, Value Down, Enter
- Indicators: LED Display
- Operating voltage: 100 V AC - 240 V AC, 50 - 60 Hz
- Power consumption: 60W
- Power connector: IEC power connector male
- Housing material: Metal, ABS plastic
- Cabinet colour: black
- Cooling: low-noise fan
- Illuminance: Red: 9600 lx 1m, Green: 22400 lx 1m Blue: 4650 lx 1m, White: 31000 lx 1m
- Width: 380mm
- Height: 240mm
- Depth: 380mm
- Weight: 5,5kg
280973
The Thunder Wash 600 W is aStrobe, Blinder and Wash Light all in one. It is equipped with648 white 0.2 Watt SMD LEDs, with an 80 beam angle and features a compact black metal housing with universal mounting bracket.The Thunder Wash 600 W comes with3-pin XLR sockets for DMX input and output, 5 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control.
- Product Type: strobe
- Type: LED strobe
- Colour Spectrum: white
- Number of LEDs: 648
- LED Type: 0.2 W
- Refresh Rate: 1 - 30 Hz
- Beam Angle: 80
- DMX Input: XLR 3-pin male
- DMX Output: XLR 3-pin female
- DMX Mode: ;; ;1-channel, 2-channel, 3-channel 1, 5-channel, 7-channel
- DMX Functions: Flash frequency, Dimmer, Flash duration
- Standalone Modes: Flash frequency, Dimmer Mode, Sound Control, Slave Mode
- Controls: Value Up, Value Down, Mode
- Indicators: LED display
- Power Supply: 100 V AC - 240 V AC, 50 - 60 Hz
- Power Consumption: 30 W
- Power Connector: IEC
- Housing Material: metal
- Housing Colour: black
- Dimensions without mounting bracket
- Width: 335 mm
- Height: 93 mm
- Length: 182 mm
281101
Prisvärd 24 kanalers ljusmixer

Highlights Behringer LC2412 Eurolight
DMX512 and Analog (0-10 V) Outputs
Sound-To-Light Function
2 Multi-Functional Channels
Chaser with up to 650 Steps
120 Scenes Storable also on PCMCIA Card
171809
The Cameo CLBARL10RGBA is a slim, versatile light bar: it can be used in clubs and discos, stage design and interior decorating, even in residential spaces. It has 252 powerful, long-life 10mm LEDs in the colours red, green, blue, and amber which ensure brilliant, even lighting with the basic colours and any desired mixed colours with a defined beam angle of 30°.

The Cameo bar can be controlled via 4, 6 or 19 DMX channels or operated in standalone mode. It is operated using buttons for mode, input, up and down with an LCD display, and comes with a built-in microphone for sound control.

The bar can be locked in position using the two mounting brackets and has two eyebolts for mounting and securing. In- and output power and DMX connectors on both ends make it possible to control multiple Cameo light bars in series. Moreover, it impresses with a low power consumption of 40W and minimal generation of heat.

- Product: LED Color BAR
- Type: WASHER
- Colour Range: RGBA
- Number of LEDs: 252 (63 x red, 63 x green, 63 x blue, 63 x amber)
- LED Type: 10 mm
- Beam Angle: 30°
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 2 / 3 / 4 / 6 / 19-channel
- DMX Functions: RGBA, Master Dimmer, Strobe, Colour Jump, Colour Fade, Colour Macro, Sound Control, 10 Programs
- Standalone Modes: Static Colour, Colour Fading, Colour Jumping, Auto Mode, Sound Control, Slave, 10 Programs
- Controls: Mode, Enter, Value Up, Value Down
- Indicators: LC Display
- Power Supply: 100 V AC - 250 V AC
- Power Consumption: 40 W
- Power Connector: ICE in and out
- Housing Material: Metal
- Housing Colour: White
- Dimensions: 1018 x 63 x 87 mm
280937
Barn doors for Flat Pro Flood with 4 adjustable leaves
- colour: black
280966
Professional PAR can with 183 ultra-bright 10-mm LEDs in the RGB colour system (60 x red, 60 x green, 63 x blue) in a conventional sturdy aluminium housing and with a beam angle of 25 degrees. Featuring a double bracket, the CLP 64 RGB 10 PS PAR is suitable for use both as a floor PAR and for mounting to cross-beams and bars. Actuation is either via the DMX protocol (3-pole XLR) with three or six control channels, in master/slave mode or standalone mode (sound control, colour change, solid colours). It is controlled by three buttons and an LED display. Its power consumption is a mere 30 Watts.
- 183 ultra-bright 10-mm LEDs (60 x red, 60 x green, 63 x blue)
- Beam angle of 25 degrees
- Low power consumption of just 30 Watts
- Operated via DMX (4 or 6 channels), in master/slave mode or standalone mode
- Simple to operate using the three buttons and LED display
- Double bracket included as standard
- Cooling method: Heat sink
- Conventional, sturdy housing
- Product: LED Par Can
- Type: PAR64
- Colour Range: RGB
- Number of LEDs: 183 (60 x red, 60 x green, 63 x blue)
- LED Type: 10 mm
- Beam Angle: 25
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 4/6-channel selectable
- DMX Functions: RGB, Master Dimmer, Strobe, Sound Control, Colour Jump, Colour Fade
- Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
- Controls: Mode, Value Up, Value Down
- Indicators: LED Display
- Power Supply: 230 V
- Power Consumption: 30 W
- Power Connector: Earting contact
- Housing Material: Aluminium
- Housing Colour: Polished
- Dimensions (without mounting bracket): 265 x 270 x 280 mm
281024
Product: Compact LED Lighting Set
Type: 4 Flat Can Bar
Colour Range: RGB
Number of LEDs: 4 x 7
LED Type: 3 W TRI Colour
Beam Angle: 25
DMX Input: XLR 3-pole
DMX Output: XLR 3-pole
DMX Mode: 6/9/15-channel selectable
DMX Functions: RGB, Master Dimmer, Strobe, Sound Control, Colour Jump, Colour Fade
Remote Connector: XLR-5 pole
Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
Controls: Mode, Enter, Value Up, Value Down
Indicators: LCD Display
Power Supply: 100 V AC - 250 V AC
Power Consumption: 50 W
Power Connector: IECC Euro Power Socket male
Housing Material: Metal
Housing Colour: Black
Dimensions: 1000 x 220 x 55 mm
Specifications CLMPARFOOTProduct: Foot Switch
Controls: Mode, Up, Down, Blackout, Microphone Sensitivity
Indicators: Red, Green, Yellow LED
Connector: 5-pole XLR male
Functions: Static Colour, Sound Active, Program Selection, Full On, Blackout
Dimensions: 450 x 150 x 60 mm
Features: 10 m 5-pole XLR cable
Specifications SLTS017EStand material: steel
Crossbar material: steel
Stand surface: powder-coated
Crossbar surface: powder-coated
Stand colour: black
Crossbar colour: black
Number of extensions: 2
Min height: 1700
Max height: 3500
Transport length: 1410
Holding fixture for TV spigot: yes
252036
With its unique three-arm construction and dazzling derby matrix effects, the Cameo Ara is a real eye-catcher. 3 watt quad LEDs create a vivid set of RGBA colours, and each of the 24 LEDs can be controlled individually via DMX for a magnificent lighting performance.

The Ara's distinctive all-metal enclosure features a bright 4-button display for intuitive setting, efficient convection cooling and an adjustable bracket plus safety eye for secure mounting. It comes with a convenient handheld infrared remote, automated programs, sound activation, 4 modes of DMX control as well as master, slave and standalone capability to provide versatility and a wide range of applications. The multi-voltage fixture operates on 100 - 240 V AC and comes with 3-pin DMX and IEC power inputs and outputs that enable easy daisy-chaining.

- Model Name: CLARA
- Product Type: LED MATRIX BEAM Effect
- Type: LED Effect
- Colour Spectrum: RGBA
- Number of LEDs Derby Effect: 24
- LED Type Derby Effect: 3W
- DMX Input: 3-pin XLR male
- DMX Output: 3-pin XLR female
- DMX Mode: 2-channel, 3-channel, 4-channel, 8-channel
- DMX Functions: Auto programs, sound programs, Matrix Beam
- Standalone Functions: auto programs, sound programs
- Controls: Mode, Enter, Up, Down
- Indicators: 4-digit LED display
- Power Connector: IEC power input and output
- Operating Voltage: 100V - 240V AC, 50 - 60Hz
- Power Consumption: 75W
- Fuse: F3AL 250V
- Maximum Ambient Temperature: 40°C
- Housing Material: metal
- Housing Colour: black
- Housing Cooling: convection cooling
- Dimensions (W x H x D, excluding bracket): 210 x 360 x 310 mm
- Other Features: adjustable mounting bracket included, safety eye
280935
The Cameo CLBARL10RGBA is a slim, versatile light bar: it can be used in clubs and discos, stage design and interior decorating, even in residential spaces. It has 252 powerful, long-life 10mm LEDs in the colours red, green, blue, and amber which ensure brilliant, even lighting with the basic colours and any desired mixed colours with a defined beam angle of 30°.

The Cameo bar can be controlled via 4, 6 or 19 DMX channels or operated in standalone mode. It is operated using buttons for mode, input, up and down with an LCD display, and comes with a built-in microphone for sound control.

The bar can be locked in position using the two mounting brackets and has two eyebolts for mounting and securing. In- and output power and DMX connectors on both ends make it possible to control multiple Cameo light bars in series. Moreover, it impresses with a low power consumption of 40W and minimal generation of heat.

- Product: LED Color BAR
- Type: WASHER
- Colour Range: RGBA
- Number of LEDs: 252 (63 x red, 63 x green, 63 x blue, 63 x amber)
- LED Type: 10 mm
- Beam Angle: 30°
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 4 / 6 / 19-channel
- DMX Functions: RGBA, Master Dimmer, Strobe, Colour Jump, Colour Fade, Colour Macro
- Standalone Modes: Static Colour, Colour Change, Colour Fading, Auto Mode, Sound Control, Slave
- Controls: Mode, Enter, Value Up, Value Down
- Indicators: LED Display
- Power Supply: 110 V AC - 250 V AC
- Power Consumption: 40 W
- Power Connector: Earthing contact
- Housing Material: Metal
- Housing Colour: Black
- Dimensions: 1018 x 63 x 87 mm
280936
The Cameo CLBARL10RGBIR is a super slim washer with RGB colour mixing, a 30° beam angle and comfortable IR remote control. With a total of 252 long-lasting and energy-efficient 10 mm LEDs the ultra bright light bar with a robust metal housing provides effective, rich colour wallpapers in bars, discos and on the stage.

The CLBARL10RGBIR can be operated via 5 DMX modes, as master, slave and standalone or in one block or separately in 3 equal blocks. 12 programs and the built-in microphone for music control ensure functionality, the manual setting is very easily done on a bright LED display using 4 buttons.

With 3-pin XLR-connectors for input and loop-through of the DMX-signal, as well as IEC-sockets for the power supply and output the Cameo CLBARL10RGBIR is equipped for serial connection. Universal mounting brackets offer extensive possibilities for mounting and alignment. The effect rich LED Washer is also available in white (CLBARL10RGBIRWH), IR remote control is included.

- Type: Washer
- Colour Spectrum: RGB
- Number of LEDs: 252
- LED Type: 10 mm
- Dispersion Angle: 30°
- DMX input: XLR 3-pin male
- DMX output: XLR 3-pin female
- DMX mode: 12-channel, 9-channel 1, 3-channel 1, 3-channel, 2-channel
- DMX Functions: RGB, 12 programs, strobe, colour macro, Sound Control
- Standalone Modes: 12 programs, Macro Colour, Auto Run, Sound Control, Slave Mode
- Controls: Value Up, Value Down, Mode, Enter, IR remote control
- Indicators: LED Display
- Power Supply: 110 V AC - 250 V AC, 50 - 60 Hz
- Power Consumption: 40 W
- Power Connector: IEC power connector male/female
- Housing Material: metal
- Housing Colour: white
- Width: 1018 mm
- Height: 63 mm
- Depth: 87 mm
280939
The Cameo FLAT PRO series FLOOD 600 IP65 is acompact RDM enabled outdoor flood light equipped with nine 12 watt 6-in-1 LEDs generating rich RGBWA colours, soft pastel hues and intense UV effects. TheIP65 rated fixture sports convection cooling, a 40 beam angle and 3,000 Hz refresh rate for flicker free performance. The hardwearing metal enclosure features3-pin screw connectors for DMX and mains input and outputplus a backlit 4-button display for easy, intuitive operation while a security lock prevents unauthorized menu access. The Cameo FLOOD 600 IP65 provides 6 modes of DMX control with dimmer and strobe functions, colour temperature correction and master, slave and standalone applications. The multi-voltage fixture operates on 100 240 V AC and comes with an adjustable universal bracket for floor placement and multiple mounting options. Barn doors are available as accessory.
- Product number: CLFLOOD600IP65
- Product type: LED Flood Light
- Type: FLAT PRO
- Colour spectrum: RGBWAUV
- Number of LEDs: 9 x 6
- LED type: 12 W (approx. 50000 operating hours)
- Refresh rate:; 3000Hz
- Dispersion:; 40
- DMX input:; 3-pin special connector, screwable
- DMX output: 3-pin special connector, screwable
- DMX mode:; 2-channel, 3-channel 1, 3-channel 2, 6-channel, 9-channel, 11-channel
- DMX Functions: colour macro, colour jump, colour fade, RGB, strobe, master dimmer, RGBWAUV
- Standalone modes: static, Auto run, fade, jump, macro, master / slave mode
- Controls: Value Up, Enter, mode, Value Down
- Indicators: backlit LCD
- Operating voltage: 110 V AC - 240 V AC / 50 60 Hz
- Power consumption: 90W
- Power connector: 3-pin special connector, screwable
- Housing material: metal
- Cabinet colour: black
- Protection class IP: 65
- Cooling: Convection
- Illuminance: 7500lx 1m
- Dimensions without mounting bracket
- Width: 180mm
- Height: 180mm
- Length: 120mm
- Weight: 4kg
280965
The Cameo HydraBeam 400 White is a bar with4 ultra-fast moving headsthat can be controlled independently. They are equipped with high-intensity, white, 10W Lumi-Engin LEDs, providing a narrow 4.5 beam angle and84,000 lux of light intensity. The moving heads swivel by up to 540 horizontally and by up to 270 vertically, and are cooled by an extremely low-noise fan.The HydraBeam 400 can be controlled in the DMX modes with 6-channel, 10-channel, 15-channel and 28-channel, and be can used as a master, slave or standalone. The built-in microphone allows an external sound control.16 automated programmes provide lively movement patterns; the strobe function will produceup to 20 flashes per second. In addition, six intensive light patterns can be selected via DMX. Therugged construction made of black steel and ABS has a backlit display with 4 buttons for easy operation. The Cameo HydraBeam 400 can be operated universally with mains voltages from 100 to 240 volts; the power consumption is a low 100 watts. For a large variety of mounting options, for example on trusses, two Omega brackets and a removable tripod flange are included.
- Item Number: CLHB400W
- Product Type: LED moving light
- Type: moving head
- Colour Spectrum: white
- Number of LEDs: 4
- LED Type: 10 W
- Beam Angle: 4.5
- Beam Angle: XLR 3-pin male
- DMX Output: XLR 3-pin female
- DMX Mode: 6-channel, 10-channel, 15-channel, 28-channel
- DMX Functions: Dimmer, TILT, PAN, Strobe, Colour Change
- PAN Movement: 540
- TILT Movement: 270
- High-speed Stroboscope: 20 Hz
- Standalone Modes: Auto Run, Sound Control
- Controls: Enter, Mode, Value Down, Value Up
- Indicators: LED Display
- Power Supply: 100 V AC - 240 V AC, 50 - 60 Hz
- Power Consumption: 100 W
- Power Connector: IEC power socket male
- Housing Material: metal, ABS
- Housing Colour: black
- Cooling System: fan
- Luminous Intensity: 84,000 lx 1m
- Dimensions without mounting bracket
- Width: 810 mm
- Height: 250 mm
- Depth: 130 mm
280976
The Cameo CLP64RGBA10PS is a professional PAR 64 spotlight in a traditional aluminium housing with 177 bright, long-lasting 10mm LEDs in the colours red, green, blue, and amber (RGBA system). Two adjustable brackets with knurled locking screws permit use as a floor spot and mounting on traverses, walls, and ceilings. The beam angle is 25.The CLP64RGBA10PS can be controlled in 7-channel DMX mode or in standalone mode, in each case with six functions. It is operated using buttons for mode, enter, up, and down. A 4-position LED display indicates the corresponding setting. XLR sockets serve as DMX in- and outputs for controlling several spotlights in series.Additional advantages are a low power consumption of just 30W and minimal generation of heat. The spotlight is also available in black (CLP64RGBA10BS).
- Product: LED Par Can
- Type: PAR64
- Colour Range: RGBA
- Number of LEDs: 177 (30 x red, 48 x green, 54 x blue, 45 x amber)
- LED Type: 10 mm
- Beam Angle: 25
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 7-channel
- DMX Functions: RGBA, Master Dimmer, Strobe,;Colour Jump, Colour Fade;
- Standalone Modes: Static Colour, Colour Change, Colour Fading, Sound Control, Slave
- Controls: Mode, Enter, Value Up, Value Down
- Indicators: LED Display
- Power Supply: 230 V
- Power Consumption: 30 W
- Power Connector: Earting contact
- Cooling: Convection
- Housing Material: Aluminium
- Housing Colour: Polished
- Dimensions (without mounting bracket): 265 x 270 x 280 mm
281028
The Cameo CLPFLAT1RGB10IR is aflat and lightweight PAR light with RGB colours and 14 beam angle providing a variety of functions and lighting effects. A total of144 large extremely powerful 10 mm LEDs provide rich and radiant colour mixing while convection cooling allows for noise-free operation.The compact black ABS enclosure of the CLPFLAT1RGB10IR incorporates adjustable twin brackets, DMX input and output on XLR connectors and IEC power connectors fordaisy chaining up to 10 units.The Cameo CLPFLAT1RGB10IR featuresIR remote control capability, 4 DMX modes, sound control and a display with mode, enter, up and down keys. It can be used as master, slave and standalone, and at 15 watts only the units power consumption is extremely low.Set composed of:
- 4 x CLPFLAT1RGB10IR
- 1 x CLPFLAT1REMOTECLPFLAT1RGB10IR:
- Type: Flat PAR
- Colour Range: RGB
- Number of LEDs: 144 (48x Red, 48 Green, 48x Blue)
- LED Type: 10 mm
- Beam Angle: 14
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 2-channel, 3-channel-1, 3-channel-2, 6-channel
- DMX Functions: Colour Fade, Colour Jump, Master Dimmer, RGB, Sound, Control, Strobe
- Standalone Modes: Colour Jump, Colour Fade, Slave Mode, Sound, Control, Static Colour, Colour Macro
- Controls: Mode, Value Down, Value Up, Enter
- Indicators: LED Display
- Power Connector: IEC connector male/female
- Housing Material: ABS
- Housing Colour: Black
- Type of cooling: Convection
- Illuminance (lx 1m): 4000 lx
- Dimensions (without mounting bracket:) 180 x 175 x 115 mm
281040
Rated IP65 according to EN 60529, the Cameo CLPFLATPRO7IP65 is a professional PAR light for exciting, creative outdoor lighting. With an illuminance of 10,000 lux and 30 beam angle thesuper slim fixture is most suitable where space is limited while the convection cooling design allows a100% silent operation.7 ultra bright high performance 10 watt LEDs produce a huge range of RGBWA colours from soft pastel hues to rich, warm tints, and the 3,000 Hz refresh rate eliminates flicker. The CLPFLATPRO7IP65 sports a total of 5 DMX modes withmultiple functions, built-in programs and an LED Display with 4 controls for easy manual operation. It also provides master, slave and standalone capability.The Cameo CLPFLATPRO7IP65 is totally protected against dust and low pressure water jets from all directions. The purpose designed die-cast enclosure includes dedicated screw connectors for DMX signal and power input and output which enable daisy-chaining up to 10 units. The universal bracket allows fornumerous mounting options.
- Colour Range: RGBWA
- Number of LEDs: 7
- LED Type: 10 W
- Beam Angle: 30
- DMX Input: 3-pin special connector, screwable
- DMX Output: 3-pin special connector, screwable
- DMX Mode: 2-channel, 3-channel-1, 3-channel-2, 5-channel, 8-channel
- DMX Functions: Colour Jump, Colour Fade, Strobe, Master Dimmer, RGBWA
- Standalone Modes: Colour Jump, Colour Fade, Static Colour, Slave Mode, Colour Macro
- Controls: Mode, Value Down, Value Up, Enter
- Indicators: LED Display
- Operating voltage: 110 - 240 V AC, 50 / 60 Hz
- Power consumption: 100 W
- Power Connector: 3-pin special screw connector
- Housing Material: Metal
- Housing Colour: Black
- IP Class: 65
- Type of cooling: Convection
- Illuminance (lx 1m): 10000 lx
- Dimensions (without mounting bracket): 180 x 180 x 160 mm
- Operating Temperature: -5C - 45C
281053
Barn doors for Studio Mini Par with 4 adjustable leaves
- colour: black
281069
The Cameo CLSB6D is theprofessional solution for configuring DMX networks. Thesplitter and booster in 19 format amplifies the DMX input signal and distributes it to 6 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and theTHRU socket for looping of the signal are duplicated on the front and back of the CLSB6Dand connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. Aswitchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.
- Type: DMX 512 protocol
- DMX Inputs: 2 (parallel)
- DMX Input Connectors: 3-pin XLR male, 5-pin XLR male
- DMX Thru Outputs: 2 (parallel)
- DMX Thru Output Connectors: 3-pin XLR female
- DMX Outputs: 6 (electrically isolated)
- DMX Output Connectors: 3-pin XLR female, 5-pin XLR female
- Controls: Power On/Off, DMX Thru Terminator
- Indicators: 6 x Power LED, 6 x Signal LED
- Power Socket: IEC power socket
- Power Supply: transformer
- Operating Voltage: 230 V AC, 50 Hz
- Power Consumption (max.): 15 W
- Dimensions (W x H x D): 483 x 44 x 160 mm
- Accessories included in package: power cord
281082
The Cameo CLSTROBE2 is a high-power LED strobe light with six 10-watt white COB LEDs and 80 beam angle for large area coverage. It allows for DMX, slave and standalone operation with strobe, dimmer and sound activation modes. The flash rate is adjustable from 1 to 20 flashes per second for an intense strobe effect. Mode, Value Up and Down keys and a 3-digit LED display permit easy manual control.The compact lightweight CLSTROBE2 is easily portable, and an adjustable bracket provides multiple mounting options. ;
- Product: Strobe
- Type: LED Strobe
- Colour Range: White
- Number of LEDs: 6
- LED Type: 10 W White COB
- Beam Angle: 80
- Flash Rate: 1-20 flashes/sec adjustable
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 2-channel
- DMX Functions: Flash Rate, Dimmer
- Standalone Modes: Flash Rate, Dimmer, Sound Mode, Slave
- Controls: Mode, Value Up, Value Down
- Indicators: 3 Digit LED Display
- Connectors: Analog on- and output 6.3 mm jack
- Power Connector: Earthing contact
- Operating voltage: 100 - 240 V AC / 50 - 60 Hz
- Housing Material: Metal
- Housing Colour: Black
- Dimensions without mounting bracket 380 x 95 x 165 mm
281090
Product type: compact LED lighting system
Type: bar with 4 flat cans
Colour spectrum: RGBW
Number of LEDs: 4 x 7
LED type: 8 W QUAD colour
Beam angle: 25°
DMX input: XLR 3-pole
DMX connector: XLR 3-pole
DMX mode: 4-channel 1, 4-channel 2, 6-channel, 8-channel, 9-channel, 16-channel, 21-channel
DMX functions: RGBW, master dimmer, strobe, sound control, program mode, 2 switchable power sockets
Controller connector: XLR-5-pole
Remote control: IR
Stand-alone modes: Program mode static colour, colour change, colour fading… , sound mode, slave, auto run, dimmer mode
Stand-alone modes: flow invert, dimmer curve, master dimmer
Controls: Mode, Enter, Value Up, Value Down
Indicators: LC display with 2 x 16 characters
Cooling system: convection
Luminous intensity 1 m per LED element: 6400 lx
Power supply: 90 V AC - 250 V AC
Power consumption: 210 W
Power connector: Neutrik PowerCon in/out, switchable power sockets: 2 x Schuko
Housing material: metal
Housing colour: black
Dimensions: 1030 x 290 x 100 mm
Specifications CLMPARFOOT2Product: Foot Switch
Controls: Mode, Up, Down, Blackout, Microphone Sensitivity
Indicators: Red, Green, Yellow LED
Connector: 5-pole XLR male
Functions: Static Colour, Sound Active, Program Selection, Full On, Blackout
Dimensions: 450 x 150 x 60 mm
Features: 10 m 5-pole XLR cable
Specifications SLTS017EStand material: steel
Crossbar material: steel
Stand surface: powder-coated
Crossbar surface: powder-coated
Stand colour: black
Crossbar colour: black
Number of extensions: 2
Min height: 1700
Max height: 3500
Transport length: 1410
Holding fixture for TV spigot: yes
252037
WAPS är en serie olika DJ ljuseffekter och passar i en vanlig E27 sockel. (den stora skruvsockeln). Detta plus att dom kan styras med en radiokontrol gör lamporna extremt lätta att applicera och använda. WAPS serien består av 6 olika typer av rörliga LED-effekters samt 2 olika lasereffekter. Moving Head Square kan dessutom fås i 4 olika färger. Effekten på alla lampor räcker väl för mindre lokaler. Effektförbrukningen är mycket låg
258137
The Cameo Eye-Eye is a powerful derby matrix effect light with 2-channel, 3-channel, 4-channel and 8-channel DMX modes, automated programs and sound activation. In addition, the fixture features master, slave and standalone functionality. 24 quad LEDs with individual DMX control capability provide colourful RGBA mixes and spectacular lighting.

The Eye-Eye comes in a heavy duty all-metal enclosure with convection cooling that sports an adjustable bracket and safety eye for secure mounting and a 4-button display for intuitive operation. Running on 100 " 240 V AC, the unit is equipped with with 3-pin DMX and IEC power inputs and outputs to facilitate daisy-chaining.

- Model Name: CLEYEEYE
- Product Type: LED MATRIX BEAM Effect
- Type: LED Effect
- Colour Spectrum: RGBA
- Number of LEDs Derby Effect: 24
- LED Type Derby Effect: 3W
- DMX Input: 3-pin XLR male
- DMX Output: 3-pin XLR female
- DMX Mode: 2-channel, 3-channel, 4-channel, 8-channel
- DMX Functions: Auto programs, sound programs, Matrix Beam
- Standalone Functions: auto programs, sound programs
- Controls: Mode, Enter, Up, Down
- Indicators: 4-digit LED display
- Power Connector: IEC power input and output
- Operating Voltage: 100V - 240V AC, 50 - 60Hz
- Power Consumption: 90W
- Fuse: F3AL 250V
- Maximum Ambient Temperature: 40°C
- Housing Material: metal
- Housing Colour: black
- Housing Cooling: convection cooling
- Dimensions (W x H x D, excluding bracket): 265 x 280 x 165 mm
- Other Features: adjustable mounting bracket included, safety eye
280950
The Cameo Flash Bar 150 combines strobe, chase and blinder effects in a single fixture that is equipped with15 powerful white 6 watt LEDs. With a maximum strobe speed up to 30 Hz, adjustable flash rate and duration, smooth dimming and 80° dispersion the Flash Bar 150 creates captivating, dynamic lighting.

It offers 1-channel, 2-channel, 3-channel, 5-channel, 15-channel and 20-channel modes of DMX control as well as master, slave and standalone functionality. In addition, the Flash Bar 150 features sound activation and mesmerizing automated programs.

The rugged black metal enclosure sports an adjustable mounting bracket and a low-noise fan to keep the fixture cool. The Flash Bar 150 provides 3-pin DMX input and output connectors, an IEC mains inlet and runs on 110 - 240 volts AC. Operation is easy and intuitive via a 4-button LED display.

- Product type: Strobe
- Type: LED Strobe
- Colour spectrum: white
- Number of LEDs: 15
- LED type: 6 W
- Dispersion: 80°
- DMX input: XLR 3-pin male
- DMX output: XLR 3-pin female
- DMX mode: 1-channel, 2-channel, 3-channel, 5-channel, 15-channel, 20-channel
- DMX Functions: Flash rate, Flash duration, Dimmer, Auto Programs
- High Speed Strobe: > 30Hz
- Standalone modes: Flash rate, slave mode, sound control, Dimmer Mode
- Controls: Mode, Value Up, Value Down, Enter
- Indicators: LED Display
- Operating voltage: 100 V AC - 240 V AC, 50 - 60 Hz
- Power connector: IEC power connector male
- Power consumption: 90W
- Housing material: Metal
- Cabinet colour: black
- Cooling: low-noise fan
- Illuminance: 2250x 1m
- Dimensions without mounting bracket
- Width: 906mm
- Height: 73mm
- Depth: 115mm
280951
The Cameo HydraBeam 300 W combines3 ultra fast, individually controllable moving heads with 540 pan and 270 tilt in a singletriangular fixture. They are equipped withultra bright white 10W Lumi-Engin LEDs providing a beam width of 4.5 each and a total of 92,000 lx. A low-noise fan keeps the fixture cool.The HydraBeam 300 W features5 modes of DMX control plus sound activation. It can be used as standalone, master or slave and includes16 automated operating modes, the strobe function fires more up to 20 flashes per second. The rugged black construction of steel and ABS sports a backlit display withfour buttons for easy manual control. The Cameo HydraBeam 300 W operates on 100 - 240 volts AC and comes with anomega bracket and detachable pole mount foruniversal mounting options.
- Product type: LED Moving Light
- Type: Moving Head
- Colour spectrum: white
- Number of LEDs: 3
- LED type: 10 W
- Dispersion: 4.5
- DMX input: XLR 3-pin male
- DMX output: XLR 3-pin female
- DMX mode: 27-channel, 22-channel, 12-channel, 10-channel, 6-channel
- DMX Functions: TILT, strobe, colour change, Dimmer, PAN
- PAN movement: 540
- TILT movement: 270
- High Speed Strobe: 20Hz
- Standalone modes: Sound control, Auto run
- Controls: Mode, Value Up, Value Down, Enter
- Indicators: LED Display
- Operating voltage: 100 V AC - 240 V AC, 50 - 60 Hz
- Power consumption: 60W
- Power connector: IEC power connector male
- Housing material: Metal, ABS plastic
- Cabinet colour: black
- Cooling: low-noise fan
- Illuminance: 92000x 1m
- Width: 380mm
- Height: 240mm
- Depth: 380mm
- Weight: 5,5kg
280974
With a huge outputcapacity of 991 m per minute, extremely short pre-heating time of 45 seconds only and whisper-quiet operation the Instant Series Hazer 1400 Pro is ideal for discotheque, live event, theater, TV and motion picture applications. Thehighly efficient, microprocessor-controlled haze machine features a long-life vapor tube of grade 316 stainless steel and automatic self-cleaning mechanism to prevent residue build-up and minimize maintenance. The units haze emission and projection fan speed are individually variable in 1% increments to suit stages and venues of any size, fluid consumption at 100% output is a low 17 ml per minute. The Instant Hazer 1400 Pro is capable of2-channel DMX control and standalone operation providing 3-pin and 5-pin XLR inputs and outputs for the DMX signal. The rugged construction sports a 3-segment LED display, a fluid drawer for canisters up to 5 liters and overheating protection. Producing a very fine, long-lasting mist the Cameo Instant Hazer 1400 Pro is the perfect choice to enhance moving light shows for impressive atmospheric effects.For best results, use only Cameo Instant Haze Fluid, which is specially designed for Cameo Hazer. Using other fluids will void the warranty and can damage the device.
- Product Type: haze generator based on evaporation principle
- Type: hazer
- Output Power: 1400 W
- Max. Output: 991 m/min
- Warm-up Time: 45 sec.
- Fluid Consumption: 17 ml/min (100% Output)
- DMX Input: XLR 3-pin male XLR 5-pin male
- DMX Output: XLR 3-pin female XLR 5-pin female
- DMX Mode: 2 channels
- DMX Modes: fan, haze volume
- Standalone Modes: fan, haze volume
- Controls: Start/Stop/Mode, Value Up, Value Down
- Display Elements: 3-segment LED display
- Power Supply: 240 V AC, 50 Hz;; ;
- Power Consumption: 1400 W
- Overheating Protection: heating element with thermostat
- Power Connector: power cord with safety plug (Type E / CEE 7/7)
- Housing Colour: black
- Recommended Fluid: INSTANT HAZE (not included)
- Dimensions:
- Width: 345 mm
- Height: 300 mm
- Depth: 365 mm
- Weight (without fluid): 11.9 kg
280978
CLMFXBAR All-In-One Solution with 5 Lighting Effects for Mobile DJs En
286487
The CAMEO CLMPARFOOTuniversal Multi PAR 4-switch foot pedal gives you optimum control of all CAMEO LED lighting system CLMPAR functions - even without connection to a DMX controller. All the functions can be activated via four solid,non-slip foot switches. Three LEDs are integrated in the compact, solid housing of the Cameo Multi PAR 4-switch foot pedal forvisual control of all the functions (mode up, mode down, blackout, sound active, program, colours, full on).The device is connected via a ten-metre, five-pin XLR cable, supplied with the device and is compatible to the following devices: CLMPAR1, CLMPAR2, CLMPAR3 and CLMPACOB1.
- Controls: Mode, Up, Down, Blackout, Microphone Sensitivity
- Indicators: Program Selection, Static Colour, Sound Control
- Connectors: 5-pole XLR male
- Dimensions: 291 x 65 x 103 mm
- Features: 10 m 5-pole XLR cable included
281008
The Cameo CLPSTMINIQ4WW is a compact all-white studio PAR light. Featuring 7 powerful 4-watt 2-in-1 LEDs, the miniature fixture creates varying degrees of colour temperature and brightness from warm to cold white with a focused 35 coverage.The CLPSTMINIQ4WW allows for 2, 5 and 6-channel DMX modes and master, slave and standalone operation with a variety of functions, 17 temperature presets and infrared remote control capability. Mode, Enter, Value Up and Down keys and the clear LED display provide easy menu access.Available in black and white, the CLPSTMINIQ4WW incorporates adjustable twin brackets for truss, floor and other mounting options. ;
- Product: LED Par Can
- Type: Studio Mini PAR
- Colour Range: Cold White/Warm White
- Number of LEDs: 7
- LED Type: 4 W 2 in 1 LED
- Beam Angle: 35
- DMX Input: XLR 3-pole
- DMX Output: XLR 3-pole
- DMX Mode: 2-channel, 5-channel, 6-channel
- DMX Functions: Master Dimmer, Cool White, Warm White, Strobe, Color Temperature
- Standalone Modes: Slave, Static Color Mode, Color Temperature (17 Presets)
- Controls: Mode, Enter, Value Up, Value Down
- Indicators: LED Display
- Power Connector: Earting contact
- Housing Material: Metal
- Housing Colour: Black
- Type of cooling: Fan
- Luminous intensity (lx 1m): 5000 lx
- Colour temperature: 3200 - 6500 K
- Remote: IR Remote
- Dimensions without mounting bracket: 168 x 186 x 186 mm
281074
The Thunder Wash 600 RGB is aStrobe, Blinder and Wash Light all in one. It is equipped with648 RGB 0.2 Watt SMD LEDs, with an 80 beam angle and features a compact black metal housing with universal mounting bracket.The Thunder Wash 600 RGB comes with3-pin XLR sockets for DMX input and output, 8 DMX modes with Dimmer, Flash frequency and duration as well as the ability to operate as a Master, Slave, or Standalone. An easy-to-read LED display with buttons for Mode, Enter, Up, and Down is used for manual operation, while the built-in microphone is used for Sound control.
- Product Type: strobe
- Type: LED strobe
- Colour Spectrum: RGB
- Number of LEDs: 648
- LED Type: 0.2 W
- Refresh Rate: 1 - 30 Hz
- Beam Angle: 80
- DMX Input: XLR 3-pin male
- DMX Output: XLR 3-pin female
- DMX Mode: ;; ;1-channel, 2-channel 1, 2-channel 2, 3-channel 1, 3-channel 2, 3-channel 3, 4-channel and 6-channel
- DMX Functions: Flash frequency, Dimmer, Flash duration
- Standalone Modes: Flash frequency , Dimmer Mode, Sound Control, Slave Mode
- Controls: Value Up, Value Down, Mode
- Indicators: LED display
- Power Supply: 100 V AC - 240 V AC, 50 - 60 Hz
- Power Consumption: 30 W
- Power Connector: IEC
- Housing Material: metal
- Housing Colour: black
- Dimensions without mounting bracket
- Width: 335 mm
- Height: 93 mm
- Length: 182 mm
281100
The Cameo UVBar 200 IR is a blacklight bar with 12 super bright 3W ultraviolet LEDs, 65 beam angle and convection cooling for noiseless operation.It features DMX control, standalone, master and slave modes with dimmer and strobe effects and a built-in microphone for sound activation. For manual operation the UVBar 200 comes with a convenient handheld infrared control. The rugged metal enclosure is equipped with 3-pin DMX and IEC mains inputs and outputs for easy daisy chaining and adjustable mounting angles. SPECIFICATION:
- Product number: CLUVBAR200IR
- Product type:LED BAR
- Type: Washer
- Colour spectrum: UV
- Number of LEDs: 12
- LED type: 3W UV
- Refresh rate: 3000Hz
- Dispersion: 65
- DMX input: XLR 3-pin male
- DMX output: XLR 3-pin female
- DMX mode: 2-channel, dimmer, strobe
- DMX functions: master, dimmer, stroboskop
- Standalone modes: master dimmer, stroboskop, sound control
- Controls: Mode;Enter;Up;Down
- Indicators: LED Display
- Operating voltage: 100-240V AC, 50-60Hz
- Power consumption: 35W
- Power connector: IEC power connector male, IEC power connector female
- Housing material: Metal
- Cabinet colour: black
- Cooling: Convection Dimensions without mounting bracket;;
- Width: 1022mm
- Height: 66mm
- Depth: 67mm
281103
The Cameo Voodoo is a2-in-1 hybrid fixture including derby and strobe effects that are individually controlled with a choice of automated, sound activation and 2-channel, 4-channel or 8-channel DMX modes. Featuring aheavy duty metal enclosure with convection cooling, 4-button display for intuitive setting, universal mounting bracket and safety eye for secure installation, the unit provides flexible master, slave and standalone applications. It comes with a convenient handheld infrared remote.The Voodoos derby effect sports 20 RGBA 3 watt LEDS with single pixel control for rich, brilliant colours while the0 - 20 Hz adjustable strobe flashes 12 white 1 watt LEDs. Themulti-voltage effect light comes with 3-pin DMX and IEC mains inputs and outputs for convenient daisy-chaining and runs on 100 - 240 V AC.Specifications
- Model Name: CLVOODOO
- Product Type: LED/Strobe Effect
- Type: 2-in-1 LED Effect
- Colour Spectrum Derby Effect: RGBA
- Number of LEDs Derby Effect: 20
- LED Type Derby Effect: 3W
- Colour Spectrum Strobe: White
- Number of LEDs Strobe: 12
- LED Type Strobe: 1W
- DMX Input: 3-pin XLR male
- DMX Output: 3-pin XLR female
- DMX Mode: 2-channel, 4-channel,; 8-channel
- DMX Functions: Auto programs, sound programs, Derby, Strobe
- Standalone Functions: auto programs, sound programs
- Controls: Mode, Enter, Up, Down
- Indicators: 4-digit LED display
- Power Connector: IEC power input and output
- Operating Voltage: 100V - 240V AC, 50 - 60Hz
- Power Consumption: 75W
- Fuse: F3AL 250V
- Maximum Ambient Temperature: 40C
- Housing Material: metal
- Housing Colour: black
- Housing Cooling: convection cooling
- Dimensions (W x H x D, excluding bracket): 275 x 290 x 280 mm
- Other Features: adjustable mounting bracket included, safety eye
281104
The Cameo CLBARL10RGBIR is a super slim washer with RGB colour mixing, a 30° beam angle and comfortable IR remote control. With a total of 252 long-lasting and energy-efficient 10 mm LEDs the ultra bright light bar with a robust metal housing provides effective, rich colour wallpapers in bars, discos and on the stage.

The CLBARL10RGBIR can be operated via 5 DMX modes, as master, slave and standalone or in one block or separately in 3 equal blocks. 12 programs and the built-in microphone for music control ensure functionality, the manual setting is very easily done on a bright LED display using 4 buttons.

With 3-pin XLR-connectors for input and loop-through of the DMX-signal, as well as IEC-sockets for the power supply and output the Cameo CLBARL10RGBIR is equipped for serial connection. Universal mounting brackets offer extensive possibilities for mounting and alignment. The effect rich LED Washer is also available in white (CLBARL10RGBIRWH), IR remote control is included.

- Type: Washer
- Colour Spectrum: RGB
- Number of LEDs: 252
- LED Type: 10 mm
- Dispersion Angle: 30°
- DMX input: XLR 3-pin male
- DMX output: XLR 3-pin female
- DMX mode: 12-channel, 9-channel 1, 3-channel 1, 3-channel, 2-channel
- DMX Functions: RGB, 12 programs, strobe, colour macro, Sound Control
- Standalone Modes: 12 programs, Macro Colour, Auto Run, Sound Control, Slave Mode
- Controls: Value Up, Value Down, Mode, Enter, IR remote control
- Indicators: LED Display
- Power Supply: 110 V AC - 250 V AC, 50 - 60 Hz
- Power Consumption: 40 W
- Power Connector: IEC power connector male/female
- Housing Material: metal
- Housing Colour: black
- Width: 1018 mm
- Height: 63 mm
- Depth: 87 mm
280938
The Cameo HydraBeam 400 RGBW is a lighting set with4 ultra-fast moving headsthat can be controlled independently. They are equipped with high-intensity, 10W Quad LEDs made by the leading manufacturer Cree, providing a narrow 4.5 beam angle. The moving heads swivel by up to 540 horizontally and by up to 270 vertically, and are cooled by an extremely low-noise fan.The HydraBeam 400 can be controlled in the DMX modes with 6-channel, 10-channel, 19-channel and 32-channel, and be can used as a master, slave or standalone. The built-in microphone allows an external sound control.16 automated programmes provide lively movement patterns; the strobe function will produceup to 20 flashes per second. In addition, six intensive colour variations can be selected via DMX. Therugged construction made of black steel and ABS has a backlit display with 4 buttons for easy operation. The Cameo HydraBeam 400 can be operated universally with mains voltages from 100 to 240 volts; the power consumption is a low 100 watts. For a large variety of mounting options, for example on trusses, two Omega brackets and a removable tripod flange are included.
- Item Number: CLHB400W
- Product Type: LED moving light
- Type: moving head
- Colour Spectrum: RGBW
- Number of LEDs: 4
- LED Type: 10 W
- Beam Angle: 4.5
- DMX Input: XLR 3-pin male
- DMX Output: XLR 3-pin female
- DMX Mode:;; ;6-channel, 10-channel, 19-channel, 32-channel
- DMX Functions:;Dimmer, TILT, PAN, Strobe, Colour Change
- PAN Movement: 540
- TILT Movement: 270
- High-speed Stroboscope: 20;Hz
- Standalone Modes: Auto Run, Sound Control
- Controls: Enter, Mode, Value Down, Value Up
- Indicators: LED Display
- Power Supply: 100 V AC - 240 V AC, 50 - 60 Hz
- Power Consumption: 100 W
- Power Connector: IEC power socket male
- Housing Material: metal, ABS
- Housing Colour: black
- Cooling System: fan
- Illumination: red 10,670 lx 1m, green 19,000 lx 1m, blue 3,710 lx 1m, white 27,600 lx 1m
- Dimensions without mounting bracket
- Width: 810 mm
- Height: 250 mm
- Depth: 130 mm
280975
1  2  3  Nästa »  |  Visa alla