Artiklar

Ingen artikel matchade din sökning
Kategorier

Ingen kategori matchade din sökning
varumärken

Inget varumärken matchade din sökning

EBS

Frequency Response 45 - 18k Hz Dynamic Output Power 120 W RMS Continuous Output Power 120 W RMS Cabinet Volume 35 liters Height 40 cm / 15.8“ Width 43.5 cm / 17.1" Depth 45.5 / 17.9" Weight 21 kg / 47 lbs
221355
EBS Flat Patch-kablar är skräddarsydda för att ta så lite plats som möjligt på ditt pedalbord, samtidigt som flexibiliteten finns i behåll. Den platta designen reducerar också risken för kabeltrassel och det blir lätt att hålla rent och snyggt.

Construction & Technical Specifications:
Conductor: Flexible copper conductor low voltage audio signal system
Operating Temperature: -15ºC to +70°C
Outer Insulation: PVC (Polyvinyl Chloride)
Signal copper cores: 20 x 0,12mm
Signal Insulation: PE (polyethylene)
Copper twisted shield: 32 x 0,12mm
Capacitance Cond./Shield: < 10 pF/decimeters
Conductor Resistance: < 10 mOhm/decimeters
Dimensions: 7 x 3 mm (rectangular cable)
Connectors: ¼” 90 degrees angled audio plug
266985
60 Watts combo perfekt som övningsförstärkare eller till den lilla spelningen.
128214
410 Classic är en ren dröm för dig som föredrar en vintagelook med vinyl och tygfront. Denna låda levererar 500W RMS med ett fantastiskt tryck och knockar det mesta på marknaden idag. När dessutom priset är sensationellt lågt kan det bara bli ALLA RÄTT!
128209
THE EBS DYNAVERB GUITAR EDITION OFFER EIGHT DIFFERENT TRUE STEREO DIGITAL REVERB EFFECTS, FROM ROOMS, TO PLATES, TO HALLS. ALL IN A COMPACT PEDAL.

Nominal Input Level - 8 dBv
Input Impedance 1 Mohms stereo 500 kohms mono
Dry Bandwidth +0 / -3 dB 20 - 20k Hz
Reverb Bandwidth +0/-3 dB 20 - 20k Hz
Tone Low Pass Filter min / max 1 / 20 kHz
Reverb Types 3 Rooms, 3 Plates and 2 Halls
Sampling Frequency 48 kHz
Dynamic Range 107 dB A-weighted
Dimensions (L x W x H) 2.8 x 4.5 x 1.4”
(70 x 115 x 35 mm)
Weight 400g (0.88 lb.)
Bypass True Bypass
Power Requirements 9 -12 V DC Regulated, 100 mA max.
271056
Elak metaldist för bas och annat! En naturlig förlängning av MultiDrive, för de som vill ha mer.



Nominal Input Level - 8 dBv
Input Impedance 700 kohms
Dry Bandwidth +0 / -3 dB 20 - 20k Hz
Effect Bandwidth +0 / -3 dB 60 - 7 kHz
Dist gain range 6 - 70 dB min.
Types Standard, Flat, Tubesim
Dimensions (L x W x H) 2.8 x 4.5 x 1.4” (70 x 115 x 35 mm)
Weight 400g (0.88 lb.)
Power Requirements 9 -12 V DC Regulated, 25 mA max.
271051
Frequency Response 55-18.000 Hz Sensitivity 93 dB Power Rating 250 W RMS Impedance 8 ohms Height 38 cm / 15 Width 49 cm / 19 Depth 34 cm / 13 Weight 15 kg / 33 lbs.
221357
Åtta olika digitala true stereoeffekter som room, plate och hall. Allt i en kompakt pedal.



Nominal Input Level - 8 dBv
Input Impedance 1 Mohms stereo 500 kohms mono
Dry Bandwidth +0 / -3 dB 20 - 20k Hz
Reverb Bandwidth +0/-3 dB 20 - 20k Hz
Tone Low Pass Filter min / max 1 / 20 kHz
Reverb Types 3 Rooms, 3 Plates and 2 Halls
Sampling Frequency 48 kHz
Dynamic Range 107 dB A-weighted
Dimensions (L x W x H) 2.8 x 4.5 x 1.4”
(70 x 115 x 35 mm)
Weight 400g (0.88 lb.)
Bypass True Bypass
Power Requirements 9-12 V DC Regulated, 100 mA max.
271053
THE EBS FUZZMO PEDAL IS DEVELOPED BY EBS TO FILL THE GAP BETWEEN EBS EXCELLENT DISTORTION PEDALS AND A VINTAGE TYPE OF FUZZ EFFECT FOR BASS. THE PEDAL PRODUCE A WIDE RANGE OF VINTAGE AND MODERN EFFECTS WITH SEVERAL FEATURES TO DIAL-IN YOUR FAVOURITE FUZZ TONE.

Blending possibilities. Similar to the Billy Sheehan Signature Drive, you can blend the fuzz tone with a clean signal. Fire up the distortion engine gain as much as you like with the 'Gain' control, set the 'Volume' for the distortion and then blend in the clean unaffected tone by turning up the 'Blend' control. Instead of a tone control, the EBS FuzzMo features a 'Shape' control that changes the shape of the gain engine, from triangle to square wave through the passive tone stack.

Character filter. If the controls does not offer enough flexibility, this pedal also feature a 'Character' filter. This goes in three steps from Flat, to subtle mid-scoop, to maximum mid-scoop (or cut).

True bypass. The EBS FuzzMo uses a True Bypass footswitch. The pedal runs on 9V DC battery or Power Supply.
256377
THE EBS REIDMAR IS THE FIRST LIGHT-WEIGHT BASS HEAD FROM EBS PROFESSIONAL BASS EQUIPMENT. A LIGHT-WEIGHT BASS AMP THAT CHALLENGES ANY HEAVY-WEIGHT BOUTIQUE AMP IN TONAL QUALITIES.
THE REIDMAR TAKE FULL ADVANTAGE OF EBS FAMED ANALOG PREAMP TECHNIQUE COMBINED WITH A CLASS-D POWER AMP.



Input Impedance 2 Mohms
Gain Range -00 - +30 dB
Character Filter Shelving, High/Low Pass, +7 dB @ 40 Hz, -2 dB @ 800 Hz,
+3 dB @ 10 kHz
Tone Controls, Bass Shelving +/-18 dB @ 60 Hz
Mid Bandpass Filter 100 – 6000 Hz
+/- 12-15 dB
Treble Shelving +/-18 dB @ 6 kHz
Bright Shelving +15/-0 dB @ 10 kHz
Balanced Output -10 dBv, Pre/Post EQ, GND Lift
Output Power 250 W RMS / 470 W Dynamic Output @ 4 ohms load
Dimensions (WxDxH) 14 x 9.8 x 3.0” (36 x 25 x 7.5 cm)
Weight 3.2 kg (7.1 lbs.)
271049
Bascombo på 30W med 1x8" högtalare, gainkontroll, 2-bands EQ, mastervolym, aux in, XLR DI-out, hörlursutgång. Session 30 fungerar givetvis klockrent även till gitarr/keyboard/digitaltrummor/munspel etc.Frequency Response 70 - 5000 Hz
Dynamic Output Power 30 W RMS
Continuous Output Power 30 W RMS
Volym 13 liters
Storlek WxDxH 12.2 x 13.0 x 9.5” / 31 x 33 x 24 cm
Vikt 8,6 kg
235439
90 watts helrörstopp
128213
En class A overdirvepedal som kan producera sustain, overdrive och andra rörförstärkarljud.



Nominal Input Level -8 dBv(active)or
-20 dBv (passive)
Input Impedance 700 kohms
Dry Bandwidth +0 / -3 dB 20 - 20k Hz
Effect Bandwidth +0 / -3 dB 35 - 12 kHz
Dist gain range 0 - 60 dB min.
Types Standard, Flat, Tubesim
Dimensions (L x W x H) 2.8 x 4.5 x 1.4” (70 x 115 x 35 mm)
Weight 400g (0.88 lb.)
Power Requirements 9 V DC Regulated, 30 mA max.
271052
THE EBS RED TWISTER GUITAR EDITION IS AN ANALOG STUDIO QUALITY CHORUS, FLANGE AND PITCH MODULATION EFFECTS FOR GUITAR. THE PERFECT COMBINATION OF USER FRIENDLINESS AND SONIC AWESOMENESS!

Nominal Input Level - 8 dBv
Input Impedance 700 kohms
Bandwidth +0/-3 dB 20 - 20 kHz
Delay Bandwith +0/-3 dB 200 - 8 kHz
Delay Level mix min/max -oo - +3 dB
Center Delay Time Flange 1.5 ms
Chorus 2.8 ms
Pitch Modul. 4.1 ms
Modulation Depth min/max +/- 50% of nominal delay time
LFO Range min/max 0.15 - 7.5 Hz
Bypass True Bypass
Dimensions (L x W x H) 2.8 x 4.5 x 1.4”
(70 x 115 x 35 mm)
Weight 400g (0.88 lb.)
Power Requirements 9-12 V DC Regulated, 35 mA max
271058
The Working horse of the pros. EBS Tube Definition (TD) heads have served big productions such as world tours with Bon Jovi, Kid Rock and Tina Turner, intimate tours with demanding bass players like Marcus Miller as well as loud and rough tours with hard working bands like The Haunted (with well over a 1, 000 gigs on EBS TD heads) or Danko Jones and is the most common EBS amp on the backline rental companies.

Natural and true. These heads also offer incredible tone; natural and true to the character of the instrument and personality of the musician using it.

660 W RMS. With 660 W RMS pure output power it will always rock the house. It is a Tube/Solid State hybrid bass amp. The tube in the Drive section warms up the sound and adds a nice natural compression and character of a tube amp.
Full control. The front panel feature a Character filter, which is a quick fix to a mid-scooped overall tone. An input Gain control sets the input level from your instrument. The Filter Active button activates/bypasses the EQ filters. A shelving Bass filter for the lows. An advanced Middle filter lets you pick the frequency range you’d like to adjust with one control and cut or boost in that range with the other.

The clever “Notch” function is active when the Cut/Boost control is set to “Notch”. You can then identify and scoop out frequencies causing unwanted feedback with the Frequency control.

A shelving Treble filter and the unique Bright filter controls the highs.
The Drive on the TD heads can be set to Tube Mode (to connect the tube) and Boost Mode. Boost Mode boosts the whole frequency range when turning up the Drive.

Finally the balanced XLR output sends a perfectly balanced line signal to front of house or a studio mixing console without the need of an external line box. Choose between post/pre EQ, with our without Speaker Simulation and Ground lift.

Input jack Phantom Power option. If used with a stereo cable, the input jack offers 9V DC Phantom Power output, that can be used to power a single 9V DC EBS pedal or an active bass.

Back panel. On the back you’ll find the Effects Loop, featuring a Mix level control that lets you blend in the effects with your sound from zero to a hundred percent. Effect Return also offers the same Phantom Power function that you find on the Input jack at the front. A Tuner output to connect a tuner rack unit easily. A Line out, in case you need the power from another amp to drive a second pair of cabinets. The Filter Remote Inputs to connect the RM-4 footswitch that lets you switch on and off Character, Filter Bypass, Drive and Mute from front of stage.
128200
Unichorus låter dig välja mellan low noise studio quality chorus, flanger och pitchmodulations-effekter.



Nominal Input Level - 8 dBv
Input Impedance 700 kohms
Bandwidth +0/-3 dB 20 - 20 kHz
Delay Bandwith +0/-3 dB 200 - 8 kHz
Delay Level mix min/max -oo - +3 dB
Center Delay Time Flange 3 ms
Chorus 5.5 ms
Pitch Modul. 10 ms
Modulation Depth min/max +/- 50% of nominal delay time
LFO Range min/max 0.15 - 7.5 Hz
Bypass True Bypass
Dimensions (L x W x H) 2.8 x 4.5 x 1.4”
(70 x 115 x 35 mm)
Weight 400g (0.88 lb.)
Power Requirements 9-12 V DC Regulated, 35 mA max
271055
Overdrive/kompressor-pedal med rattar för drive, tone, level och clean. Mini switch för att kontrollera kompressorn med high/mid/off/input/output. Billy Sheehans signaturpedal.
235437
Input Impedance 2 Mohms Frequency Response 20 - 20.000 Hz Gain Range -00 - +30 dB Maximum Compression Ratio Compressor 3:1 Tone Controls Bass +/-18 dB @ 80 Hz Middle +/- 15dB @100 - 4.500 Hz, Q=0.7/1.8 Treble +/- 15 dB @10 kHz Bright -0/+12 dB @ 10 kHz Drive Gain Range 0 - 40 dB Drive Type Tube ECC83 Post Drive EQ Middle +/- 15 dB @50 - 2.000 Hz Edge +/- 12 dB @ 6 kHz Other Features Hi and Lo Preshape EQ, Individual and Common Effect Loops, Soft Switch Remotes for Drive, Mute, Filter and Character Preshape EQs, Dual Balanced Outputs Speaker impedance 2 - 8 ohms Continuous Output Power 750 W RMS @ 2 ohms, >600 W RMS @ 4 ohms Dimensions W x D x H 19" x 14" x 3U 48cm x 36cm x 13cm Weight 16 kg / 36 lbs
221354
The EBS HD360 Is A Compact And Heavily Equipped Bass Head For The Bass Player Who Demands Clout And Versatility Without Fuss. Take Full Control Of Your Tone In The Studio And On Stage With This Excellent Bass Head — A Favourite Among Many Professional Bass Players!

This 'High Definition' bass head is completely based on Solid State technique. The HD heads have become favorites among studio session players, offering an exceptionally good and thought-out EQ that has been tuned-in carefully to cover all the frequency ranges that you need to optimize your tone.

The basic layout of the control panel (from left to right) feature a Character filter, which is a quick fix to a modern type sound by offering a mid-scooped overall tone. The input Gain control set the signal level into the amp from your instrument. The Filter Active button activates/bypasses the EQ filters, the shelving Bass filter followed by the advanced Middle filter where you pick the frequency range you’d like to adjust with the right control and cut or boost in that range with the left control.

Don’t forget the clever "Notch" function. When the Cut/Boost control is set to "Notch" you can identify and scoop out frequencies causing unwanted feedback with the Frequency control. It is very useful in rumbling venues that may pick up certain frequencies, or when you get feedback from an upright bass.

Next is the shelving Treble filter and then the unique Bright filter, which is almost like a volume control for the cabinet’s tweeter. When turned up it opens up the sound and makes the tone huge and alive.

The Drive offers that extra grit that makes the amp growl as much as you want. From just a smooth boost to growling distortion. The input jack has a special feature since, if used with a stereo cable, it offers 9V DC Phantom Power output, that can be used to power a single 9V DC EBS pedal or an active bass.

Back panel. On the back panel you'll find the Effects Loop, featuring a Mix level control that lets you blend in all effects hooked up through the loop with your sound, from zero to a hundred percent. Effect Return also offers the same Phantom Power function that you find on the Input jack at the front. There is a Tuner output, for connecting a tuner rack unit easily. You have a Line out, in case you need the power from another amp to drive a second pair of cabinets, and finally the Filter Remote Inputs to connect the RM-4 footswitch that lets you switch on and off Character, Filter Bypass, Drive and Mute from front of stage.
235438
En high performance analog kompressorpedal med val mellan solid state, tube och multibandskompressor.



Nominal Input Level - 10 or - 4 dBv
Input Impedance 700 kohms
Bypass Bandwidth +0 / -3 dB 20 - 20k Hz
Gain range 0 - 15 dB
Compressor Ratio min / max 1:1 - 5:1
Threshold -25 - +6 dB adjustable inside
Attack Time (80%) <10 ms
Release Time (80%) typ. 100 ms
Dimensions (L x W x H) 2.8 x 4.5 x 1.4”
(70 x 115 x 35 mm)
Weight 400g (0.88 lb.)
Power Requirements 9-12 V DC Regulated, 35 mA max*
271054
OctaBass Studio Editionanalog oktavpedal skapar en ton en oktav under spelad ton och skapar en ny dimension i ditt sound.



Nominal Input Level -8 dBv
Input Impedance 700 kohms
Dry Bandwidth +0 / -2 dB 20 - 20k Hz
Dry Level min / max -oo / 0 dB
Dry Noise Level -96 dBv
Octaver Bandwidth +0 / -3 dB 10 - 110 Hz
Octaver Level Gain min / max -oo / 12 dB min
Octaver Filter Slope 18 dB/oct. Low pass
Low Pass Triggering Threshold -70 dBv @200 Hz
Dimensions (L x W x H) 2.8 x 4.5 x 1.4” (70 x 115 x 35 mm)
Weight 400g (0.88 lb.)
Bypass True Bypass
Power Requirements 9-12 V DC Regulated, 30 mA max
271050
Frequency Response 35 - 3 k Hz Sensitivity 103 dB Power Rating 400 W RMS Impedance 4 ohms Volume 116 liters Height 69 cm / 27 Width 58 cm / 23 Depth 44 cm / 17 Weight 32 kg / 71 lbs
221358
THE EBS MULTICOMP GUITAR EDITION IS A HIGH PERFORMANCE, ANALOG COMPRESSOR PEDAL, WITH A CHOICE BETWEEN SOLID STATE, TUBE SIMULATION AND MULTI-BAND COMPRESSION.

Nominal Input Level - 10 or - 4 dBv
Input Impedance 700 kohms
Bypass Bandwidth +0 / -3 dB 20 - 20k Hz
Gain range 0 - 15 dB
Compressor Ratio min / max 1:1 - 5:1
Threshold -25 - +6 dB adjustable inside
Attack Time (80%) <7 ms
Release Time (80%) typ. 70 ms
Dimensions (L x W x H) 2.8 x 4.5 x 1.4”
(70 x 115 x 35 mm)
Weight 400g (0.88 lb.)
Power Requirements 9-12 V DC Regulated, 35 mA max*
271057
Natural sound. The EBS philosophy is to amplify the character of the instrument and the personality of the musician, to offer a natural sound. The physical aspects of a class-D power amp makes that mission a real challenge. However, the EBS Reidmar shows that anything is possible with clever engineering!

Due to advanced soft-clip technology, the Reidmar does not suffer any loss of definition in the low register when the volume is turned up. It takes maximum advantage of the power at hand. That makes it a powerful, great sounding bass amp that is fully comparable with other heads with larger and more expensive power amps.

The Nature of the Beast. While offering a powerful and defined sound at most levels, when pushed to the limit it provides a natural and useful amp distortion, like the Drive on a solid state amp. This further extends the possibilities to use the EBS Reidmar in different musical contexts.

Technically Speaking. The analog preamp sporting EBS renowned built-in compressor and the 4-band EQ-section are really intuitive and feature the (for EBS) characteristic Bright and Notch filters. It reminds a lot of the layouts of HD360 and TD660.

The amp also features an Effects loop (send and return), Balanced XLR-out for live and studio use (with pre/post EQ switch and Ground Lift), Line out, Headphones out and Speakon speaker output.

The Reidmar use a D-class power amp providing 250 W RMS/470 W Dynamic Output @ 4 ohms load. Weight is 3.2 kg (7.1 lbs).

Perfect Companions. The EBS Reidmar matches perfectly well with a couple EBS ClassicLine mini-size 112 cabinets, the new ClassicLine 210 or the NeoLine mini-size cabinets for more clarity and punch. Or any single full size EBS cabinet of choice rated at 4 Ohms for maximum power and tone quality.

With two amps together, connected through the Effects loop (Send from one to Return on the other), you can drive two 4 ohm cabinets, getting a separate volume control for each cabinet while using the EQ from the one you plug in to.
221370
EBS Flat Patch-kablar är skräddarsydda för att ta så lite plats som möjligt på ditt pedalbord, samtidigt som flexibiliteten finns i behåll. Den platta designen reducerar också risken för kabeltrassel och det blir lätt att hålla rent och snyggt.

Construction & Technical Specifications:
Conductor: Flexible copper conductor low voltage audio signal system
Operating Temperature: -15ºC to +70°C
Outer Insulation: PVC (Polyvinyl Chloride)
Signal copper cores: 20 x 0,12mm
Signal Insulation: PE (polyethylene)
Copper twisted shield: 32 x 0,12mm
Capacitance Cond./Shield: < 10 pF/decimeters
Conductor Resistance: < 10 mOhm/decimeters
Dimensions: 7 x 3 mm (rectangular cable)
Connectors: ¼” 90 degrees angled audio plug
266987
EBS Flat Patch-kablar är skräddarsydda för att ta så lite plats som möjligt på ditt pedalbord, samtidigt som flexibiliteten finns i behåll. Den platta designen reducerar också risken för kabeltrassel och det blir lätt att hålla rent och snyggt.

Construction & Technical Specifications:
Conductor: Flexible copper conductor low voltage audio signal system
Operating Temperature: -15ºC to +70°C
Outer Insulation: PVC (Polyvinyl Chloride)
Signal copper cores: 20 x 0,12mm
Signal Insulation: PE (polyethylene)
Copper twisted shield: 32 x 0,12mm
Capacitance Cond./Shield: < 10 pF/decimeters
Conductor Resistance: < 10 mOhm/decimeters
Dimensions: 7 x 3 mm (rectangular cable)
Connectors: ¼” 90 degrees angled audio plug
266986
EBS Flat Patch-kablar är skräddarsydda för att ta så lite plats som möjligt på ditt pedalbord, samtidigt som flexibiliteten finns i behåll. Den platta designen reducerar också risken för kabeltrassel och det blir lätt att hålla rent och snyggt.

Construction & Technical Specifications:
Conductor: Flexible copper conductor low voltage audio signal system
Operating Temperature: -15ºC to +70°C
Outer Insulation: PVC (Polyvinyl Chloride)
Signal copper cores: 20 x 0,12mm
Signal Insulation: PE (polyethylene)
Copper twisted shield: 32 x 0,12mm
Capacitance Cond./Shield: < 10 pF/decimeters
Conductor Resistance: < 10 mOhm/decimeters
Dimensions: 7 x 3 mm (rectangular cable)
Connectors: ¼” 90 degrees angled audio plug
266988