Focusrite RFR REDNET-D16R-MK2

Input Trim

-78 to 0dB in 1dB steps (per channel)

Output Trim

-78 to 0dB in 1dB steps (per channel)

Sample Rate Range

32Hz to 214kHz

Gain Error

-0.3dB

Dynamic Range

Greater than 138dB (-60 dBFS method)

THD + N

Less than -130dB (0.00003%); 0 dBFS input

Latency

11 to 45 samples (network and input sample rate dependent)

Supported Sample Rates

44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit

Clock Sources

Internal, Word Clock, DARS, AES input 1-2, AES input 9-10 or from Dante Network Master

External Word Clock Range

Nominal sample rate ±7.5%

Channel Count

2 x 2 S/PDIF Channels (reduces AES/EBU input channels)

Input And Output

2 x DB25 connectors (AES59 Combined I/O / Tascam Digital)

Alternate Input (Optional DARS)

1 x Female XLR (replaces DB25 channels 1-2)

Alternate Output

1 x Male XLR (duplicates DB25 channels 1-2)

Channel Count

2 x 2 S/PDIF Channels (reduces AES/EBU input channels)

Input

1 x RCA phono socket (replaces DB25 channels 3-4)

Output

1 x RCA phono socket (switchable, duplicates any DB25 channel pair)

Input

1 x BNC 75Ω port (switchable termination)

Output

1 x BNC 75Ω port

PSU

2 x Internal, 100-240V, 50/60Hz, consumption 30VA

Network

2 x EtherCON NE8FBH-S, also compatible with standard RJ45 connectors (Accomodates rugged EtherCON NE8MC*. Does not intermate with Cat 6 cable connector NE8MC6-MO and NKE65* cable)

Primary PSU (A)

Green LED. Illuminates when an AC input is applied and all DC outputs are present

Secondary PSU (B)

Green LED. Illuminates when an AC input is applied and all DC outputs are present

Secondary Network

Green LED. Indicates that a network connection is present on secondary port when in redundant mode. Not used in switched mode

Network Locked

Green LED. When unit is following network grand master, shows valid network lock. When unit is network master, shows lock to indicated clock source. Flashing indicates external clock is selected but not connected

Sample Rate

Orange LED for each: 44.1kHz, 48kHz, x2, x4

Pull Up/Down

Orange LED. Indicates unit is set to operate on a Dante pull up/down domain

Signal Indicators

16 Green LEDs, 8 input/8 output indicators. Illuminate @ -126dBFS

Clock Source

Orange LED for each: Internal, Word Clock, DARS, Input 1–2 and Input 9–10

Primary Network

Green LED. Indicates that a network connection is present on primary port when in redundant mode. When in switched mode, a valid network connection at either primary or secondary network port will cause this LED to illuminate

Redundant

Allows unit to connect to two independent networks

Switched

Connects both ports to integrated network switch allowing daisy-chaining of devices

Height

44.5mm/ 1.75″

Width

482.6mm/ 19″

Depth

263mm/ 10.35″

Weight

3.84kg

PSU

2 x Internal, 100-240V, 50/60Hz, consumption 30VA.

Operating Temperature

Operates at up to an ambient temperature of 50 degrees Celcius